Dual 2 would be this one right???

[LuvfiAudio 0]

Dual 2 would be this one right http://www.the12volt.com/caraudio/woofer_c...sp?Q=2&I=22 ???

if not then which one of this will it be http://www.the12volt.com/caraudio/woofer_configurations.asp

[johnecon2001 82]

That's 2 DVC2 ohm subs.

[LuvfiAudio 0]

soo what would it be???

[ABXX49 20]

soo what would it be???

What does that mean? You're not asking a question.

[LuvfiAudio 0]

DUAL 2 Can be wired down to 1 ohms or .5 ohms??? or no??? and from http://www.the12volt.com/caraudio/woofer_configurations.asp which impendance would they be???

This is what the website ask....obviously i know how many speakers i got..just dont know which impendance i need to chose for 2 speakers that are dual 2

Select Qty.: 2 speakers

Selec Impendance: What opition do i put on that one??? on that website

[mdexxxiv 1]

Option 1 (parallel/parallel) = 0.5 ohm load

Voice coils wired in parallel, speakers wired in parallel

Recommended Amplifier: Stable at 1/2 ohm mono

Option 2 (series/parallel) = 2 ohm load

Voice coils wired in series, speakers wired in parallel

Recommended Amplifier: Stable at 2 or 1 ohm mono

Option 3 (series) = 8 ohm load

All voice coils wired in series

Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

[LuvfiAudio 0]

eh i am afraid i dont understand lol....

Um well just answr this question for me then...what is the lowest ohm the opition of the Fi subwoofers "Dual 2" be lowered to???

[patented17 21]

Dual two ohm subwoofers can be 1 or 4 ohms lowest being 1 ohm.

[LuvfiAudio 0]

dam bastards i paid 20 dollars for some local car shop to wire my subwoofers to 1ohm and told me that they can only be wired down to 2 ohms.....and i was pretty postive that they were the Dual 2 opition...

so more and likely they wired it to 4 ohms right???

so tomorrow I AM A wire them my self...thanks

Edited February 1, 2009 by 0mero

[jonbearsmt 919]

dam bastards i paid 20 dollars for some local car shop to wire my subwoofers to 1ohm and told me that they can only be wired down to 2 ohms.....and i was pretty postive that they were the Dual 2 opition...

so more and likely they wired it to 4 ohms right???

so tomorrow I AM A wire them my self...thanks

that should be fun to watch... can you tape it and upload it on youtube for us to see

[LuvfiAudio 0]

that seems like a sarcastic comment...um so its not possible to wire Dual 2 opition down to 1 ohm???? yes or no????

[patented17 21]

If you get a DMM(Digital Multi. Meter) you can put the leads on it and figure out what ohms it is. If it's dual two ohms each coil should read around 1.7-1.8 ohms.

[patented17 21]

You can wire a SINGLE dual two ohm subwoofer to 1 ohms. If you have TWO 2 ohm subwoofers, then the lowest would be 2 ohms.

[jonbearsmt 919]

where in texas are you?

[LuvfiAudio 0]

Um near the tip of texas......biggest near city near me is Mcallen or Brownsville..

eh i stilll havent learned much on the ohm crap...but i do thank you all forbeing patient with me

because watch this is how my speakers are set atm....i have 2 12 fi bl...with each in a seperate room for itself....and their both DUAL 2 so I AM A use this http://www.the12volt.com/caraudio/woofer_c...sp?Q=1&I=22 ..this is possible right with a single DUAL 2 Sub

[patented17 21]

Yes, it's possible with a SINGLE dual 2 ohm speaker.In your case the installer, told you he wired it to two ohms, because that is the lowest ohm(resistants) you can go with both speakers being wired to each other.

[LuvfiAudio 0]

ook thank you patent 17 .....

but still dam guy i asked to wire it to 1 ohm.... and i mean it should have been possible....since the box has 2 terminals one for each speaker so i assume each speaker would be able to be wired to 1ohm soo i stll dont understand why he would tell me the lowest he can wire them is 2 ohm..

and if its not to much to ask...which http://www.the12volt.com/caraudio/woofer_c...sp?Q=1&I=22 is it for a single sub thats DUAL 2 and which one is it on that same website for 2 speakers Dual 2

Edited February 1, 2009 by 0mero

[patented17 21]

http://www.the12volt.com/caraudio/woofer_c...sp?Q=1&I=22

In that diagram the subwoofer they use is dual 2 ohms.

http://www.the12volt.com/caraudio/woofer_c...sp?Q=2&I=22

In this diagram each subwoofer is dual 2 ohms.

I think you need to read up on Ohm's Law first to understand what people are trying to tell you.

[LuvfiAudio 0]

That i do...I AM A read more on it tomorrow when i have time..for now i have to go to bed....

anyways thanks so much patented17 you were so much of a big help to me...

ok well for now i am going to and check on this question later....for my last and final question lol.... you said 2 subwoofers tat were DUAL 2 can only be wired down to 2 ohms...how come on this http://www.the12volt.com/caraudio/woofer_c...sp?Q=2&I=22 it goes down to 0.5...

[patented17 21]

Well, they can be wired down to that, just that most amps aren't stable that low. The ones that are stable that low, the warranty doesn't cover it.