Jump to content
Sign in to follow this  
banginAltima

D3100 Questions

Recommended Posts

What is the thread size for a D3100?

Why does it say on the battery not to exceed 14.4 volt for charging? (I see people charging around 15 volts all the time on here)

What will happen if my charger "exceeds" 14.4 volts?

Share this post


Link to post
Share on other sites

Nevermind about the thread size. Didn't find the supplied hardware. Of course it didn't help that the hardware wasn't in the little bag

Share this post


Link to post
Share on other sites

Originally the D3100's shipped with M8 hardware, but recently we have changed to M6 hardware to allow a larger surface for current to flow allowing more power to the amps :) Brass post and stud adaptors are available if you require a different type of mount. Also, 14.4V charging is recommended to promote the longest life out of the battery, however, it is safe to charge up to 14.9V in moderate temperatures.

Share this post


Link to post
Share on other sites

how moderate of temps are we talking about? 95 degrees outside, highoutput alt set to 14.9 volts with the battery in the engine compartment. Is that too hot?

Share this post


Link to post
Share on other sites

Outside temps are not nearly as important as the ambient temp right around the battery. For best performance it's best to keep the open air temp around our batteries below 140 degrees. This is not the case for all AGM battery designs... many can not take this much heat.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×