Jump to content
Greg McCool

It looks so nice

Recommended Posts

Glad to see you switched amps now for the sub :P

The only way I would take out my X is when I find a woofer that has a bolt in cone and that is better than a X... So as of right now the X is where it's at for me!

Share this post


Link to post
Share on other sites

I'm curious how you have that 3000D mounted to the box. I get nervous with my 1500D mounted to my dual RL-i8's enclosure. I can't imagine the vibration that 3000D must experience. Especially with the box bolted to your chassis.

I used rubber grommets between the 1500D and the mount points, just for a little bit of absorption. Are you using anything like that? I wouldn't mind finding something even more effective.

Share this post


Link to post
Share on other sites
I'm curious how you have that 3000D mounted to the box. I get nervous with my 1500D mounted to my dual RL-i8's enclosure. I can't imagine the vibration that 3000D must experience. Especially with the box bolted to your chassis.

I used rubber grommets between the 1500D and the mount points, just for a little bit of absorption. Are you using anything like that? I wouldn't mind finding something even more effective.

I have never had a problem mounting any amp to a sub box up to 160+ db. I hope I don't start having a problem....

Edited by Greg McCool

Share this post


Link to post
Share on other sites
See you at SBN Greg I wont be competeing but Ill be there supporting every one

Sweet!

yep Ill be riding down with Tommy K and Hank

Share this post


Link to post
Share on other sites
:) :) :)

Share this post


Link to post
Share on other sites

NICE!! more Sundown goodness!!

Share this post


Link to post
Share on other sites

NSB 90 x2

1/0 ground for each NSB

1/0 lead to alt

make custom battery box x2

2 NSB 90 and some 1/0....

l_b103c1ef5524480f96b2606c3445e101.jpg

empty battery box

l_e0b26b1ba13e4889b7b318901e797c72.jpg

battery box..... but I only need 4in of it

l_6a9a95b3f04b439d89921d792d24355a.jpg

The tray bolted in

l_ac3b0c661f6441d2a31a5f5773d23021.jpg

finished with 1/0 ground, 1/0 power lead to ault and 1/0 run of ground to back NSB 90

l_578e9bacfa084292b7591845333cd6b6.jpg

OEM 1/0?

l_9256b5d08c604183ae64e2d002e220a8.jpg

Back NSB 90

l_137226cc4e544fc48324eac87a620b4a.jpg

You would think it was made to come together...

l_43ed1b12a916480898d7ced1db37b4a9.jpg

I still have to tie in the back battery... I will do it tomorrow..

Share this post


Link to post
Share on other sites

×