Jump to content
Sign in to follow this  
kryptonitewhite

door hinge(es)? door popping against panels!

Recommended Posts

yesterday out of the blue my car door started popping while I open it, not as bad when i shut it. in front the body seam is right up against the door seam, so the door is sitting forward... pushed/bent toward the front of the car.

The rear seam is now a big gap.

I checked the hinges, they dont look bent or like they have any play.

DSC_0001-5.jpg

DSC_0002-5.jpg

DSC_0003-6.jpg

DSC_0004-3.jpg

DSC_0005-3.jpg

top hinge

DSC_0006-2.jpg

bottom hinge

DSC_0007-2.jpg

sorry this camera blows

I tried lifting the end of the door, there is no play, and visually the black rubber/plastic bushings look OK... bolts tight....

Share this post


Link to post
Share on other sites

looks like you pushed the door open to hard, one to many times. you usually see that when people have there door open in a parking lot and someone hits the door a little, or someone has there door open and backs up into something with there door.

the frame is probably bent a little where the hinges connect.

Edited by าชกุศล

Share this post


Link to post
Share on other sites

I compared it to the other side to see if there was a gap between the hinge and where it mounts, but both sides look the same, and when I open both doors all the way, they seem to go the same

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×