12-05-09 Murfreesboro, TN Madvette MECA 1x

[shizzzon 461]

I'm goin. i go to everything i dont know why...

Nobody else around my area is goin so checkin to see fi anybody in the TN area might be goin...

[shizzzon 461]

Gots a couple pic n vid from the show-

Guy with a van runnin 24 TruBass 8s-

Then the almighty Paul Strouth, hehe.

He's got 12x Sundown SA-12s runnin 4 Sundown 3500ds in a bandpass design

My run.. i was down a few tenths from last show for good reason, helluva story to tell..

It took my just over 3hrs to drive there.. Guess what i found once i got there... I drove for just over 3hrs with NO ALTERNATOR!!! Ahh!

The turn on fuse had popped when i started the car this morning and was runnin purely off my batts...

Luckily, XS Powermaster batts and Mechman make some good products!

My xs floats at 13.0v and after 3hrs and 20 min of driving, it was down 11.9v This was a D3100 and D5100 = 170aH. Not bad!

I spent 3hrs on and off charging the batts back up with my mechman alt rated for 250A. I was able to get the batts from 11.9 to 12.7v by the time i started doin my runs.

My burp score was down with only a 150.8.

I did, however, compete in driveby this time for the first time.

Driveby- meter vehicle 6ft away metering 30sec average on real music.

I scored a 126.1 on my first time ever. If you don't know what's loud and what isn't, go check out meca's recrods for driveby for each class and so on.

a 137.x i believe is the loudest to date outside the vehicle in MECA.

Anyways, after the comp, my batts still at 12.7 so i went ahead and drove all the way home and by the tiem i got home...my batts are at 13.1 now and alt still workin fine and in the high 14s like it should be

I won 1st in driveby and 2nd in burp.

Next show 1-16-10 i believe.. gots some modeling to do for some new designs.

[porkchop 304]

congrates on the win.

thanks for the pic and vid

[Mac N Cheese 90]