Jump to content
60ndown

rl-p 12 review.

Recommended Posts

just an update,somthing that is becomeing more apparent to me as the days go by listening to the rl-p is the way i get to listen to more music,because of this sub.there are tons of tracks that i would skip before,because i didnt like the way they were 'produced/recorded' ??? well no im thinking it was my old sub,the rl-p lets me enjoy all the tracks i previously had to skip? like i sais before.this sub makes everything it sees sound excellent,and if you want to 'crank' it,it accomadates with effortless ease,audiophile sq and hammering spl.for those of you who have your rl-ps in sq setups,im sure you know exactly what im talking about,for those of you who take this fine subwoofer and run it purely spl.........sell me your rl-p and go buy a kicker ?

Share this post


Link to post
Share on other sites

:+1:

After a couple weeks and a few 5 to 8 hour drives under it's belt, the more I play my new RL-P the better it sounds :wub: . I haven't heard a sub in my truck hit so low, ever :blink: . This is gotta be the best product that I have bought blind :fing34: (no chance to see, touch, hear) and am so glad I took a chance on other peoples opinion. My only wish is that I had the space to run 2. I am sure there are other subs out there that I haven't auditioned (SI, RE, DD) that would sound as good, but until money starts growing on trees in my backyard, I am gonna hang onto this bad boy and love it for what it is...........DA BOMB.

Share this post


Link to post
Share on other sites
:+1:

After a couple weeks and a few 5 to 8 hour drives under it's belt, the more I play my new RL-P the better it sounds  :wub: .  I haven't heard a sub in my truck hit so low, ever  :blink: .  This is gotta be the best product that I have bought blind  :fing34: (no chance to see, touch, hear) and am so glad I took a chance on other peoples opinion. My only wish is that I had the space to run 2.  I am sure there are other subs out there that I haven't auditioned (SI, RE, DD) that would sound as good, but until money starts growing on trees in my backyard, I am gonna hang onto this bad boy and love it for what it is...........DA BOMB.

so how many rms does your amp show the rl-p?

Share this post


Link to post
Share on other sites

1200 RMS, need to do the big three this weekend though. Amp clips before the sub does :fing34:

Share this post


Link to post
Share on other sites
1200 RMS, need to do the big three this weekend though.  Amp clips before the sub does  :fing34:

man mine sounds good with 600! 1200 has gotta be sweet whats the big 3?

Share this post


Link to post
Share on other sites

i gotta agree...the rl-p just keeps reaching...low is "demonic"..high is subtle yet pronounced. this is a truely wonderful sql sub and i've owned, listened to some of the best.

the rl-i isn't bad either...i'd never would have guessed an 8 would get that low!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites

The big three is basically upgrading the cables in your charging system, there is a sticky on a post that walks you thru it in the amplifier section. Have a read thru it and then follow suit, makes a big diff for your amps when they hit peak transients. My picture is one a few different species of African Cichlids that I raise and breed as my other hobby. I sell babies and ship them all over the US. I'll change it up in the next couple weeks with a different type that I have. But back to the big three, read it, learn it, live it.

And yes 1200 watts to my RL-P makes it just the way I like it................................LOUD :domoslay::domoslay::domoslay::ghost:

Share this post


Link to post
Share on other sites

The big three is basically upgrading the cables in your charging system, there is a sticky on a post that walks you thru it in the amplifier section. Have a read thru it and then follow suit, makes a big diff for your amps when they hit peak transients. My picture is one a few different species of African Cichlids that I raise and breed as my other hobby. I sell babies and ship them all over the US. I'll change it up in the next couple weeks with a different type that I have. But back to the big three, read it, learn it, live it.

And yes 1200 watts to my RL-P makes it just the way I like it................................LOUD :domoslay::domoslay::domoslay::ghost:

Share this post


Link to post
Share on other sites
African Cichlid

OHhhh, its a freakin fish, I thought you were making porn with a squash and a mellon.

Share this post


Link to post
Share on other sites

ya, i think the questionable object here is not the fish, but the large pinkish thing

i barely noticed there was a fish until you mentioned it

Share this post


Link to post
Share on other sites

wow..u guys and hotdogs..lmao...

freaks

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites

oh ok,alt battey and motor cable upgrades!

just one more thing i have to do.............thanks

Share this post


Link to post
Share on other sites

I see HCCAfan has a 1200d for sale pretty cheap, you should jump all over that. As for the rest of ya, how do ya thinks I breed my fish???!!!! :fing34:

Share this post


Link to post
Share on other sites

look like the amp does 725 wrms @ 2 OHM? hows your rl-p getting 1200?

Specifications:

Model Number

1200D

Max Power

1200

4 Ohm Rating

425 x 1

2 Ohm Rating

725 x 1

1 Ohm Rating

1200 x 1

Mono Rating

-

Freq. Resp.

20 - 500khz

THD+N

< 0.9%

Damping factor

> 50

Signal to noise ratio

> 80

Crossover range/scope

LP 30 - 250hz

12/24 db octave

Input sensitivity

200mV - 5V

Safe load impedance

1 ohm

Equalization Circuit

Intelli Q

10 db

Remote level control

Optional

Amplifier protection*

T,D,R,S,O

Externally Bridgeable

Yes

Dimensions**

18.7

Share this post


Link to post
Share on other sites

ah!, well i think (but im not sure ,how do i tell) that i have the dual 4 ohm,which means i need an amp that does 1000 wrms plus @ 2 ohms.........any idea? im useing a phoenix gold xennon right now 600wrms sq is real good and i wouldnt want a less sq amp for more power? so whats a great sq amp with 1000 wrms @ 2 ohms?

Share this post


Link to post
Share on other sites
ah!, well i think (but im not sure ,how do i tell) that i have the dual 4 ohm,which means i need an amp that does 1000 wrms plus @ 2 ohms.........any idea? im useing a phoenix gold xennon right now 600wrms sq is real good and i wouldnt want a less sq amp for more power? so whats a great sq amp with 1000 wrms @ 2 ohms?

do u get ur rl-p in the group buy?

anyway, to check impedence of the coils just grab ur dmm and set it to ohms....then just simply touch ur terminals with the probes...if it's a d4 sub, ur dmm will read ~4....it'll read ~2 if it's a d2 sub....make sure u measure each coil seperately..meaning pull all speaker wire from the terminal...

as to ur question concerning amps...look up ur amps bigger brother. if u like the pg, stick with a pg...

other options..

memphis 1500d

mtx 1501d

jl 1000/1

eD 9.1

others i'm sure, but i can't think of any at the moment...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:

Share this post


Link to post
Share on other sites
ah!, well i think (but im not sure ,how do i tell) that i have the dual 4 ohm

60ndown, I think you're the cool cat from Santa Cruz - in which case you were shipped a dual 4ohm (D4) subwoofer as stated in your invoice. If you're not, shoot me an email with your order number and I can tell you. Alternately you can test the coil as Kent has suggested :)

Share this post


Link to post
Share on other sites

Even though the D4 wired in parrallel is 2ohm the Orion can be wired to 1ohm. It has two sets of speaker outputs that are internally bridged. To wire it to 1ohm you take the + of one and the - of the other just as if you were bridging a 2 channel amp.

Share this post


Link to post
Share on other sites
Even though the D4 wired in parrallel is 2ohm the Orion can be wired to 1ohm.  It has two sets of speaker outputs that are internally bridged.  To wire it to 1ohm you take the + of one and the - of the other just as if you were bridging a 2 channel amp.

so id get all 1200 wrms?

yes santa cruz

im not going to take the sub out just now to dmm it? sounds too good.dont wanna touch ANYTHING

betta do the big 3 first,im not unhappy with my measley 600 just greedy :stupid:

Share this post


Link to post
Share on other sites

No need to take it out of the box... just use the meter on the wires...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×