Jump to content
rmzsuzuki89

4 DP21 Wall Build

Recommended Posts

This is my new thread since there have been some changes. I found the width I needed to do a wall and that was my original want, so that's the route I decided to go.

Have been planning this for a lil while now. Being busy with school and what not, it has been a long time coming. I finally started the other day though.:D

Just a heads up: Being in college full time, with a ton of papers coming up soon, this will not be a fast build. Just gonna work on it when I can between class, gf, and other things until its done.

What's going in:

4 DP21"s

4 SAZ-3000d's (new heat sinks)

Maxx-Link

200+ ft. Tsunami Competition 1/0 (5+ 5- runs back)

9 Deka 9a31's (1 up front, 8 in back)

1 DC Power 290 amp alt (for now)

EDIT: Was going to be a 4th order designed by iamamp3pimp, but I found some more width and decided to design myself a flat wall since it's the first idea that I was wanting to do.

Other misc. things

All in an '03 Expedition XLT

Big thanks to Robin for the design, I may still go with a 4th in the future.

The design

53u7g3.jpg

Probably gonna do a couple 2x4's in the port instead of one.

na4z.jpg

These are some of the color schemes I'm thinking about.

Will match my dust caps lol.

120j87a.jpg

op6wro.jpg

258wmfo.jpg

Edited by rmzsuzuki89

Share this post


Link to post
Share on other sites
:peepwall: :peepwall: :peepwall:

Share this post


Link to post
Share on other sites

the red and black looks sick be careful your gonna kill someone with that

Share this post


Link to post
Share on other sites

them pics make me want to skeet pm me if you want to give anything away for free

Share this post


Link to post
Share on other sites

Gutting process. And my dad getting the golf cart ready for a sub lol.

2dwdytf.jpg

I'll be so happy to get that rats nest cleaned up.

rhkeh4.jpg

Bolting down to where the seats were bolted down to.

n3t3cm.jpg

1zbcp01.jpg

15yt4xs.jpg

Share this post


Link to post
Share on other sites

Im looking for a place to rent...something by the ocean with a breeze, maybe.

Ill give you $100 a month to stay in your port! :ohnoes9:

This looks TUFF.

Share this post


Link to post
Share on other sites

That's going to be isanely loud .... What kind of electical are you going to be running with it???

Share this post


Link to post
Share on other sites

Crimping my old 1/0 for redoing my big 3.

vcriw.jpg

rmv2fl.jpg

I love my new crimpers so much that I decided to hack saw a terminal in half to see how it looks (this one was actually not a very good one compared to my new ring terminals and after having some experience). Ended up hitting my thumb and slicing half way up my thumb nail lol...And sorry, the pic's crappy. But it looks like a solid chunk of copper that's fused together. Hydrolic crimpers ftw.

2jer6vt.jpg

Deka up front.

16riok.jpg

efrf4.jpg

Share this post


Link to post
Share on other sites

Test fit for the buss bars on the back battery bank. I kinda just wanted to see how they looked back there too. They will be in a box with a cover when finished.

2i23ehy.jpg

sqplxs.jpg

2wq7iix.jpg

2zpi8ld.jpg

15cbvd4.jpg

Thanks to wgsj_fortvalley/PeachtreeCustomz for the front and back buss bars.

Share this post


Link to post
Share on other sites

Wire

14aj6sh.jpg

First two runs back, 8 more to go.

wat1j6.jpg

34srmns.jpg

I've had my old power wire ran under like that for over a year now with no problems. No drilling through the firewall and stuffing it under carpet ftw.

Share this post


Link to post
Share on other sites

Some of the old setups the Expedition has seen.

mn1cbd.jpg

2vkanpv.jpg

28a0rqo.jpg

2a8gg9l.jpg

f3fatg.jpg

2vb1k5f.jpg

1jsrwn.jpg

208embp.jpg

i6f4sy.jpg

This was in for a lil while until we put it in my gf's car.

24qk2tl.jpg

My last setup in my Explorer before I got my Expedition. Sorry about the shittyness, they were taken with a Razor back in the day lol.

33nksxg.jpg

30hllrk.jpg

Share this post


Link to post
Share on other sites

Hell that's goin to be sick. Might hurt somebody, lol.

Share this post


Link to post
Share on other sites

Grommet, it's dirty down there.

izoxao.jpg

Another hole cut and filed down a lil.

20u7iip.jpg

2m5z2gh.jpg

5kq5jl.jpg

34hj9lt.jpg

Fuse holders will be screwed to the battery rack somewhere, haven't decided exactly where yet.

sgoj1w.jpg

Gotta find a way to coordinate all the wire when it's all in.

nco5ec.jpg

A good chunk of the first roll used.

27yr3gi.jpg

Share this post


Link to post
Share on other sites

Since a couple of people wanted to see my crimpers, here they are.

2la3k08.jpg

f1fou8.jpg

j0wino.jpg

30cr8tk.jpg

No progress today. After getting home from the track I ended up redoing the inside of one of my bearded dragon enclosures.

Hitting it hard again tomorrow after class hopefully.

Share this post


Link to post
Share on other sites

Just got done drilling all my holes and putting the grommets in.

There are just 8 of them here. I'll take pics of them all when I finish vacuuming all the metal shavings out.

oknypx.jpg

6gy0xt.jpg

Share this post


Link to post
Share on other sites

Just finished up for today. Got all of the holes drilled and grommets in, and 3 more runs ran. So just 3 more runs to go, I'm running out of places to send the wire down to under the car lol.

ngzspv.jpg

16877ld.jpg

Almost one spool gone, moving to the next spool.

2rrb585.jpg

Sending a run down.

2875kz.jpg

How it looks up front as of now, quite messy right now lol.

m96fea.jpg

Share this post


Link to post
Share on other sites

Got all the runs back done today, 10 total.

1h8spg.jpg

Gonna do a piece of mdf somewhere in here to mount the fuse holders to.

9uls2b.jpg

2ls7es0.jpg

10z8y3c.jpg

2qk3w9l.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×