kenwood kdcmp528 no sub noise

[erik67111 1]

ok everything is hooked up right is there a setting on the headunit to turn the subs on or am i fucked

[jcarter1885 994]

Read the manual that came with it, make sure you have all connections right and make sure even the rca's going into the amp are in the right location.

[erik67111 1]

thats the point i dont have the manual and yes everything is hooked up perfectly

[jcarter1885 994]

Have you tried looking on the internet to find the manual, go to the company's website and look under there technical or support section. But it may be something besides the headunit thats the issue. Do you have another amp, headunit or sub to check to see if those components are working individually?

[NB50 206]

Not hard to find one.

http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCX589.pdf

[erik67111 1]

everything work just this morning before i switched headunits

[erik67111 1]

ok i went and messed with it when the volume is below 20 its like playing a 50 hz tone on the subs full blast and when you turn it up over 20 it plays the songs beat but under that is the 50 hz tone still and sometimes the subs cut in and out

[jcarter1885 994]

bad grounds or bad headunit rca shields, try another headunit or mp3 player

[erik67111 1]

bad grounds or bad headunit rca shields, try another headunit or mp3 player

it works on my other headunit so its probably the ground is there a way to make a new ground for it

[KU40 173]

Just run a wire somewhere else.