Jump to content
Sign in to follow this  
mariobjones

Sundown 1500

Recommended Posts

Yes but it voids the warranty.

Share this post


Link to post
Share on other sites

What coils do your icons have? And your planning on switching to xcons and wiring to .5?

In my honest opinion, don't be cheap and run it at .5, if you need 3000watts buy a 3000d.

And if you do end up running it at 0.5 you better have a good electrical setup.

Share this post


Link to post
Share on other sites

I beleive the V1's were stable @ .5 ohm but not the V2's

Share this post


Link to post
Share on other sites

Can it be done? Yes. Should it be done? Probably not. Can you do it? That we don't know. For daily you shouldn't run your amp that low unless you really know what you are doing and know you have the electrical support for it. Get a second and strap them if you are already stuck on that load.

Share this post


Link to post
Share on other sites

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Share this post


Link to post
Share on other sites

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Share this post


Link to post
Share on other sites

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Yes and to me the OP is just skimping out of buying a 3000watt amp.

I also know distortion will rise a bit, not sure if it'll be audible or not.

To me this is like buying a subaru wrx, adding a mbc and boosting it from the stock 14.5psi to 25psi and going YIPPIE I'm race ready!

Share this post


Link to post
Share on other sites

I beleive the V1's were stable @ .5 ohm but not the V2's

The v.2 does everything the v.1 does.

Share this post


Link to post
Share on other sites

I beleive the V1's were stable @ .5 ohm but not the V2's

The v.2 does everything the v.1 does.

I stand corrected. Thank you.

Share this post


Link to post
Share on other sites

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Yes and to me the OP is just skimping out of buying a 3000watt amp.

I also know distortion will rise a bit, not sure if it'll be audible or not.

To me this is like buying a subaru wrx, adding a mbc and boosting it from the stock 14.5psi to 25psi and going YIPPIE I'm race ready!

Hey, hey! Not everyone can get their hands on an STI

Share this post


Link to post
Share on other sites

I'm not sure about the V2s, but the V1s can do it with proper electrical. But I have some doubts that the OP will upgrade his electrical.

Gotta have :morepower1: to make :morepower1:

Yes and to me the OP is just skimping out of buying a 3000watt amp.

I also know distortion will rise a bit, not sure if it'll be audible or not.

To me this is like buying a subaru wrx, adding a mbc and boosting it from the stock 14.5psi to 25psi and going YIPPIE I'm race ready!

Hey, hey! Not everyone can get their hands on an STI

Your an idiot. :bigok:

Share this post


Link to post
Share on other sites
Sign in to follow this  

×