4th order band-pass for two SA-10's

[ChrisAnglin 0]

Here's the build pics from DL Designs. Talk about pure sickness.

Ill put the subs in with Knuconcepts 10G and I'll use a sealing ring and larger diameter screws than usual. Powered By a Crescendo BC2000D on 12V system via 1984 Volvo 240

[ssh 924]

Does the top panel unscrew for installing / removing drivers?

[Shogen 325]

^^this... and box looks sick bro!!!

[LDW3RD 0]

Extremely wicked well built box, I sure this thing is going to pound.

[steveo50 3]

Sooo sexy!

[Notorious97200 339]

Looks really nice !

[ChrisAnglin 0]

No was just gonna have the box and just say screw it. its too nice to use why put the subs in you know! LOLZ!

Ya the top is not attached I will attach it with glue and screws when my sub are securely, and bi-permanently fastened to the baffles. And ALSO I know you have a lot of Experience... So what would be the best option for terminals?

I want gold binding posts, but do not know where to get a good (2) pairs that are real quality and good deal.

[Randal Johnson 544]

Awesome looking enclosure ...

[Ryan916 2]

B-e-a-utiful wow. Bet it sounds even better than it looks!

[ChrisAnglin 0]

Ya its gonna do very good work. Tuning is 49 Hz and with a 4th order that means low extension, i do Wonder what Kind of Bandwidth I will get from it. I hope its flat.

[Ryan916 2]

Were the 45's in the sealed chamber just to subtract a little volume?

[ChrisAnglin 0]

No sir. I believe They will round-out the airflow that much more and allow the bass to be that much more precise. An Orb shape inside the box would be dope. Even in a sealed enclosure it helps it unload smoother and louder. less chopped air. OR its just overkill either way I'll appreciate what it does for the airflow.

Edited September 6, 2011 by gfhnk

[ChrisAnglin 0]

MY HIGHS AMP COUSTIC Power Logic 45w per channel at 4 ohms, REALL Y CLEAN low THD.

THIS MY Knuconcepts 10G for Internal box wiring. Ill 8 G on the outs to the amp. Wired at 1 ohm

THIS IS one of MY (2) SA-10's D4.

[ssh 924]

You can get nice binding posts from Parts-Express.com

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=091-1245

[bassman3 0]

Nice box you got there