SSA Icon 18" enclosure design help

[John Campbell 0]

Just picked up a 18" dual 1 ohm SSA Icon and have it in a 3 cube sealed enclosure now. Looking to optimize this woofer with the right box and design. It is wired to 2ohms on a JL 1000.1 Slash v1. Any suggestions or help will be appreciated.

[Mark LaFountain 1,054]

Just picked up a 18" dual 1 ohm SSA Icon and have it in a 3 cube sealed enclosure now. Looking to optimize this woofer with the right box and design. It is wired to 2ohms on a JL 1000.1 Slash v1. Any suggestions or help will be appreciated.

All sorts of enclosure recommendations and enclosure designs on this page.

[Frostedflakejake 148]

That box is considerably too small.

http://www.soundsolutionsaudio.com/index.php/product-information/icon.html

Go to that page.

Scroll down.

Check out "Enclosure Recommendations" tab and "Pre-Designed Enclosures" tab

[ricksi30 923]

Just picked up a 18" dual 1 ohm SSA Icon and have it in a 3 cube sealed enclosure now. Looking to optimize this woofer with the right box and design. It is wired to 2ohms on a JL 1000.1 Slash v1. Any suggestions or help will be appreciated.

Welcome to the forum man! Get some max dimensions posted and we will get you setup.