Jump to content

Recommended Posts

 

The evil has been ordered, now the wait will get the best of me.

peepwall.gif

I might have to start a thread for when is my order going to ship because is has been a long wait already. wink.png

 

orly3.gif

Share this post


Link to post
Share on other sites

 

 

The evil has been ordered, now the wait will get the best of me.

peepwall.gif

I might have to start a thread for when is my order going to ship because is has been a long wait already. wink.png

 

orly3.gif

 

I thought I would have gotten a tracking number by now.  :ghost:

Share this post


Link to post
Share on other sites

Send Aaron a PM ever few hours asking for updates.

Share this post


Link to post
Share on other sites

The evil has been ordered, now the wait will get the best of me.

peepwall.gif
I might have to start a thread for when is my order going to ship because is has been a long wait already. wink.png
 

orly3.gif

 

I thought I would have gotten a tracking number by now.  ghost.gif

Should be one in your store account smile.png

It won't be moving yet though ;/

Share this post


Link to post
Share on other sites

Send Aaron a PM ever few hours asking for updates.

I can go one better, I will visit him. :)

Share this post


Link to post
Share on other sites

 

 

 

 

The evil has been ordered, now the wait will get the best of me.

peepwall.gif

 

I might have to start a thread for when is my order going to ship because is has been a long wait already. wink.png

 

 

orly3.gif

 

 

I thought I would have gotten a tracking number by now.  ghost.gif

 

Should be one in your store account smile.png

It won't be moving yet though ;/

There is, I just can't help but, well you know. :)

Share this post


Link to post
Share on other sites

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?

Share this post


Link to post
Share on other sites

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?
How are you gonna have a 42 port width if the box is only 40?

Share this post


Link to post
Share on other sites

 

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?
How are you gonna have a 42 port width if the box is only 40?

 

The port is 6 X 20 and 42 inches long wink.png

Share this post


Link to post
Share on other sites

 

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?
How are you gonna have a 42 port width if the box is only 40?

Knuckle head ;)

Share this post


Link to post
Share on other sites

Austin is on it!

Chop this kid is always giving me a hard time! Maybe you need to straighten him out. :)

Share this post


Link to post
Share on other sites

 

 

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?
How are you gonna have a 42 port width if the box is only 40?

 

The port is 6 X 20 and 42 inches long wink.png

You got it Rick.

 

P1-15"

P2-25.5"

+.75" double baffle

+.75" P1 thickness

=42"

Share this post


Link to post
Share on other sites

 

 

 

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?
How are you gonna have a 42 port width if the box is only 40?

 

The port is 6 X 20 and 42 inches long wink.png

You got it Rick.

 

P1-15"

P2-25.5"

+.75" double baffle

+.75" P1 thickness

=42"

:P sorryyyyyyy. haha. i read it wrong my B. :D

Share this post


Link to post
Share on other sites

Well it seems a little evil progress has started. Box is under way. Pictures will come later...

Share this post


Link to post
Share on other sites

And you're not done yet?

Share this post


Link to post
Share on other sites

I am thinking this might make a fun job for Friday. The 4runner has 91,000 on her and I figure I may as well keep her as nimble as she can be. Also it is nice having my FIL running a partstore.

 

2013-04-02_22-22-11_497.jpg

Edited by nem

Share this post


Link to post
Share on other sites

And you're not done yet?

No I have been dragging my feet and waiting on Austin.

Share this post


Link to post
Share on other sites

Where is the pictures sir.

Share this post


Link to post
Share on other sites

I am thinking this might make a fun job for Friday. The 4runner has 91,000 on her and I figure I may as well keep her as nimble as she can be. Also it is nice having my FIL running a partstore.

 

2013-04-02_22-22-11_497.jpg

lucky you.... 

Share this post


Link to post
Share on other sites

And you're not done yet?

No I have been dragging my feet and waiting on Austin.

 

also Neal, were these the parts you were saying to get for my car? http://www.amazon.com/gp/part-finder/slide-show/2003/Toyota/Camry/ref=au_pf_cr_13?ie=UTF8&carId=001&partsNode=318327011

Share this post


Link to post
Share on other sites

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?

What are your goals for this instal? Do you know what the resonant freq in your vehicle is? You could possibly tune differently to get a flatter freq response or for a better spl score.

Share this post


Link to post
Share on other sites

Where is the pictures sir.

 

Lets just say they are hiding with some evil intentions.

Share this post


Link to post
Share on other sites

 

And you're not done yet?

No I have been dragging my feet and waiting on Austin.

 

also Neal, were these the parts you were saying to get for my car? http://www.amazon.com/gp/part-finder/slide-show/2003/Toyota/Camry/ref=au_pf_cr_13?ie=UTF8&carId=001&partsNode=318327011

 

No they were all 4runner parts, sorry.

Share this post


Link to post
Share on other sites

 

I have been kicking around some box designs and I have a certain foot print I want to keep.

 

This is where I currently stand.

 

Evil 15 D2

 

Box will be 40"x21.5"x22.5" . Port is going to be 6"x20"x42" at just under 33hz with a total of 120" of port.

Vent match is .034, 37.906ft/sec.

 

My plan is to take my xcon box and cut it down and go from there.

 

More to come....

Bump for box input. Do the numbers look good?

What are your goals for this instal? Do you know what the resonant freq in your vehicle is? You could possibly tune differently to get a flatter freq response or for a better spl score.

It has been adjusted a little to get what I am after. Lets just say an old school designer who I have been helping made a couple adjustments.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×