Jump to content
swagger_wagon468

Questions about the wall in the Wagon...

Recommended Posts

now... this is my first wall that i will be doing. and i am not to sure on how to go about starting.

i already have a cardboard mock-up of the false floor...but thats it.

my car has alot of wierd curves etc, so im not sure how to exactly "measure" my deminsions.

so how would i get a volume?

i will need someone to design 2 ports for me as well.

basically, how do i start? any info is appreiciated.

its 4 DCON 15"s off of a sax1200 :)

here is some pics of the rear. its going BEHIND the 2nd row of seats.

2012-03-21_11-34-35_602.jpg

2012-03-21_11-34-42_160.jpg

2012-03-21_11-33-33_513.jpg

2012-03-21_11-20-44_372.jpg

2012-03-21_11-20-55_798.jpg

2012-03-21_11-22-25_829.jpg

2012-03-21_11-21-13_733.jpg

Share this post


Link to post
Share on other sites

not trying to be a discouraging hater but why a wall & all that space,weight & work for just 1200wrms ?

Share this post


Link to post
Share on other sites

I have no experience with walls, but you could just make a regular square box then fill in the sides with trim panels, just a suggestion.

Share this post


Link to post
Share on other sites

not trying to be a discouraging hater but why a wall & all that space,weight & work for just 1200wrms ?

Why not? Power isn't everything.

Share this post


Link to post
Share on other sites

Whatever makes you happy.eek5wavey.gif

Share this post


Link to post
Share on other sites

not trying to be a discouraging hater but why a wall & all that space,weight & work for just 1200wrms ?

Why not?... iirc, its easier to increase DBs via cone area over wattage.

K thanks bye

Share this post


Link to post
Share on other sites

I have no experience with walls, but you could just make a regular square box then fill in the sides with trim panels, just a suggestion.

i was thinking this...

But i think i may need to use more space than the "center square" to get the volume i need.

Thanks bro

Share this post


Link to post
Share on other sites

Whatever makes you happy.eek5wavey.gif

Sorry but ever since you joined SSA, i personally have never seen a post worth a shit.

Hence ur -50 rep... (or close to it)

/mini-rant

Share this post


Link to post
Share on other sites

yes it will be a cool system to have but cone area isnt always everything

id rather use a single sub or 2 with more power to achieve the same result & still be able to see out my rear windows & get better gas mileage too but hey thats just me smile.png

Share this post


Link to post
Share on other sites

No, cone area is king. But this is of topic, sorry swagger. I would suggest a normal box with trim panels as well. Save you the hassle of all the curves and glass work.

Share this post


Link to post
Share on other sites

That does seem like the easiest way...

I need to measure again.

Hopefully i have enough space to do that.

Keep em comin!

Share this post


Link to post
Share on other sites

Honestly, I would just do a big ass box, firing up, all in the rear cargo area. Output would likely be pretty similar, and you could still see.

Otherwise, I'd do a wall behind the b-pillars.

Just my opinion.

Flame on.

Share this post


Link to post
Share on other sites

I fully agree Stefan, with that much space I would just do up firing box with port to the rear.

Share this post


Link to post
Share on other sites

While a quad 15 Dcon low power wall would be suuuper sick, the most logical way has been stated above. Otherwise, I would do what has also been mentioned.. Build a square box and fill in the trim. I'm sure you have the volume if you extended the box far back enough.

Share this post


Link to post
Share on other sites

not trying to be a discouraging hater but why a wall & all that space,weight & work for just 1200wrms ?

my wall did a 152 on 1200w.

Share this post


Link to post
Share on other sites

not trying to be a discouraging hater but why a wall & all that space,weight & work for just 1200wrms ?

my wall did a 152 on 1200w.

slayer.gif I'll take cone area over power any day.

If you are set on the wall I would also build the biggest box that you can and seel it up from there.

Share this post


Link to post
Share on other sites

How's this build going?

Share this post


Link to post
Share on other sites

Well... to barely be able to fit the box into the car...

I can barely fit the subs on a design.

So... how much port do i need?

On the baffle, i will have like (2) 4"x8" (about) spaces for port...

Ill get a pic up tomorro. :)

Share this post


Link to post
Share on other sites

I would use a minimum of 35 square inches of port area per 15 if possible.

Share this post


Link to post
Share on other sites

Calculation for that good sir?

Anyone wanna design me the ports?? If so... shoot me a text.

404-831-2928

Thanjs.

Jonathan

P.S.... need this like tomorrow. Haha

Share this post


Link to post
Share on other sites

PM'd to help haha.

Share this post


Link to post
Share on other sites

why not make the biggest possible square box in there center port 2 15s on each side, thats how the wall is now that im building for 4 ab xfls. what are your max dimensions behind the seats?

Share this post


Link to post
Share on other sites

For a box this size internal distance could be an issue. Please give dimensions of your box and the layout of the wall. Also you should plan on making the port removable so you can fine tune the box.

Edited by Duane

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×