Jump to content
Sign in to follow this  
lib

ohms?

Recommended Posts

would this work, a Hifonics Brutus bxi 2000w with a 18 inch btl n2? what would the ohms be when i by the btl? it would be dual 1 right?

Share this post


Link to post
Share on other sites

http://en.wikipedia.org/wiki/Resistor#Series_and_parallel_resistors

simple electronics my friend.

for a single subwoofer with two 2 ohm coils you would wire them in parallel to get 1 ohm load at the amplifier.

again if you want a final 1 ohm load at the amp then you want the dual 2 ohm coil configuration (for 1 subwoofer)

Share this post


Link to post
Share on other sites

so..... what should i get/do

Share this post


Link to post
Share on other sites

again if you want a final 1 ohm load at the amp then you want the dual 2 ohm coil configuration (for 1 subwoofer)

Share this post


Link to post
Share on other sites

lmao... Sorry but that was pretty straightforward on the answer but seems like he saw too many words and didn't read past the first 2 lines.

Share this post


Link to post
Share on other sites

so..... what should i get/do

1_2ohm_dvc_1ohm.gif

Share this post


Link to post
Share on other sites

so..... what should i get/do

Burn them all in a fire, or do some reading and educate yourself a little bit.

This attitude of not looking for answers is way too common. I find it pretty gratifying if I find an issue I can't work out immediately, do some research and answer my own questions. The knowledged gained from that self education excursion sticks with you a little bit more than someone saying 4 ohms.

Burn.....Burn.....Burn

Share this post


Link to post
Share on other sites
Sign in to follow this  

×