Jump to content
nem

Austin863's X-WAGON Build

Recommended Posts

Where is the Torres calculator?

Share this post


Link to post
Share on other sites

Okay i got it but determining port area with vent mach. how do i do that? i never understood if i want it low medium or high.

Share this post


Link to post
Share on other sites
Box1.png

Share this post


Link to post
Share on other sites

Let me know if everything looks good if so building is starting tonight!

Share this post


Link to post
Share on other sites

Looks instresting. Does this program say anything like you may encounter port noise if you go smaller or larger on the port?

Share this post


Link to post
Share on other sites

No that is basically all you see on the screen right there.

Share this post


Link to post
Share on other sites

Maybe some one can let us know. in my program it shows port noise in anything smaller than a 12" (113.04) port. When you convert yours to a round it is just over 11".

Share this post


Link to post
Share on other sites

The design you have looks pretty good, but you need to make a few changes. I'd add some bracing, and change "# of common port walls" to 2 or 3. 3 = a port on the right or left side. 2 = a center port between the subs. This will change your tuning. Also your height is 24, so your port height would be 22.5 not 24. (assuming the port orientation is the standard top to bottom)

I'd use ~100 square inches of port area, a bit more if you have the room.

Share this post


Link to post
Share on other sites

How do i know the displacement of bracing?

Share this post


Link to post
Share on other sites

How do i know the displacement of bracing?

What are you using?

Share this post


Link to post
Share on other sites

Torres. but never mind i got it now haha. :P give me a sec ill post the pic.

Share this post


Link to post
Share on other sites
Box2.png

Share this post


Link to post
Share on other sites

Your port is still off, it should be 23.5 H. I would change it to 23.5 X 5, and adjust the box volume to make up for the port change. What kind of power will you be running?

Share this post


Link to post
Share on other sites

1500w @ 1ohm.

Share this post


Link to post
Share on other sites

The design you have looks pretty good, but you need to make a few changes. I'd add some bracing, and change "# of common port walls" to 2 or 3. 3 = a port on the right or left side. 2 = a center port between the subs. This will change your tuning. Also your height is 24, so your port height would be 22.5 not 24. (assuming the port orientation is the standard top to bottom)

I'd use ~100 square inches of port area, a bit more if you have the room.

Not just tuning but will effect net volume as well. Especially if you use 3 common walls.

Share this post


Link to post
Share on other sites

It won't let me edit on my phone. The tuning is a little off on the new Torres calculator. I let him know bit haven't heard back. See if you can download the original gray one.

Share this post


Link to post
Share on other sites

Not just tuning but will effect net volume as well. Especially if you use 3 common walls.

Correct

Share this post


Link to post
Share on other sites

I got it now i think it will work well for the most part now. haha everything is fixed as you guys said. 129.5in ^2 of port area. 11.68 cubes.

Share this post


Link to post
Share on other sites

Well this is the only update I have Chop, I am pretty sure Austin has learned patience.

2012-11-17_16-04-22_452.jpg

Share this post


Link to post
Share on other sites

that was fast
:(

Share this post


Link to post
Share on other sites

Started cleaning up the wonded GCON for a rebirth!

P1000966.jpg

P1000967.jpg

Share this post


Link to post
Share on other sites

P1000968.jpg

P1000969.jpg

Share this post


Link to post
Share on other sites

This poor coil and spider sure did see some heat!

P1000970.jpg

P1000971.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×