12" Xcon

[chaserizzle11 0]

Videos will help alot Nathan.

[Nstickler91 0]

http://www.youtube.com/watch?v=38ZSN2PtK_Q&feature=youtu.be

here is the video and it. there isnt anything that it can possible be hitting on the inside and there are no marks

[ricksi30 923]

Maybe the dust cap is loose? How did you set the gain?

[ricksi30 923]

Bass boost?

[Nstickler91 0]

Bass boost is off gain is about 1/2 to 3/4

[ricksi30 923]

Bass boost is off gain is about 1/2 to 3/4

HOW did you set the gain?

[Nstickler91 0]

Turned it up about half cause it is at 1 ohm now. I checked with a dmm today and it's at 1 ohm an the reason I can't turn the gain higher is because of this problem.

[Nstickler91 0]

http://s152.photobucket.com/albums/s167/nstickler91/xcon/ there is the album with the sub out of the box.. when i got the sub freshly shipped. it had the chips in the magnet and the spider was not fully glued as seen in the pictures. i didnt think anything of it think that the sub was brand new and handmade and inspected. but as u can see there is no damage to the sub>

[Sencheezy 689]

[Nstickler91 0]

Y the unhappy face?

[Nstickler91 0]

Y the unhappy face?

[Nstickler91 0]

Any support or advice would help. Cause I would love to listen to some bass music already

[Duran 387]

I see no problem with your spider joint; the chips in the magnet are purely cosmetic, they probably happened during shipping. Your dust cap is loose

[Nstickler91 0]

Okay so how do I fix this

[Duran 387]

See if you can find out where it has come loose

[Nstickler91 0]

Wouldn't it be where the bubble occurs?

[S.DeYoung 967]

Watching the video, it sounds like it is a dustcap loose. Check around the edges of the cap and see if there is any movement.

[S.DeYoung 967]

Just read Durans post. Agree 100%

[Nstickler91 0]

Okay I'll check when I get home. In the video u can see the bubble happen its right above the word Xcon

[S.DeYoung 967]

^{I watched the video again. Is there something you are leaving out of this story? There should be no reason that woofer does that, even on 2x the power.}

[pmureika 31]

Wouldn't it be where the bubble occurs?

Not if the Dust Cap is loose.Epoxy works good.

[Nstickler91 0]

That's what I'm saying it isn't even at rms and it is doing this and I have no clue to what it is.

[S.DeYoung 967]

Did you buy new or used?

[Nstickler91 0]

It's brand new. I started this post the day I installe it

[nem 2,019]

Pull the sub and shake it and see it there is something loose. I am not sure if they put a boob style cap under the dish cap, but it sure does look like it came loose.