Jump to content
swift

*Swift's Rebuild* 3 SP4 18's, 12k Walled F250

Recommended Posts

Here's the model you asked for. The green is a classic super boom box. It gives you more bottom end but you just don't have enough room for it. I played around with several box sizes and tunings staying within your deminsions and I'd stick with the plan you had the PM's so you can adjust tuning as you play with the system. The red is the 19 cubic feet tuned to 31.5 hertz that was talked about in the PM's.

sp4.jpg

Share this post


Link to post
Share on other sites

Thanks alot, I know my truck peaks pretty low so I'm sure that will have some effect also. Did port area change that graph much?

Share this post


Link to post
Share on other sites

Swift's back at it again! HELLZ YEAH!

Edited by Dictator

Share this post


Link to post
Share on other sites

Ok looks like I am at 20cu ft. net tuned at 30.5, with 275in of port area. I think this will be fine. May not meter the loudest but should murder the lows, anybody find a good priced 5500 let me know.

Edited by swift

Share this post


Link to post
Share on other sites
:woot:

Share this post


Link to post
Share on other sites

So after looking at a Vent Mach calculator I am ending up with .040 - .052 depending on the power I run. From what I have read this looks like it will work good. I will post up some photos tonight of the enclosure being assembled hopefully.

Share this post


Link to post
Share on other sites

love watching your builds.

Share this post


Link to post
Share on other sites

Tuned in for picz :D

Share this post


Link to post
Share on other sites

Hope you have this bangin by this weekend.

Share this post


Link to post
Share on other sites

Hope you have this bangin by this weekend.

It's bangin, but only with 2. They still have not shipped yet so I guess they won't be here by Friday :(

Share this post


Link to post
Share on other sites

Dang....

I demand over night shipping!

Lol

Not that it matters.

Share this post


Link to post
Share on other sites

Nothing exciting but pics of progress, Until I receive a "Shipped" status I will take my time, lol.

Love working with birch.

wood16.jpg

wood13.jpg

wood12.jpg

wood14.jpg

wood11.jpg

Baffle, doubled and rounded inside edges.

baffle2.jpg

baffle.jpg

I have to go get the all thread I will use for bracing. I also will probably be using some 2in hardwood dowel for the vertical bracing so I do not have to run all thread through the port, although that may be a perfectly fine option. I also will probably use solid brass terminals instead of regular zinc plated. I will use 12 posts (one for each coil) so re-wiring can be done without removing subs.

Share this post


Link to post
Share on other sites

i loved the first build, i really like what your doing with this one!

Share this post


Link to post
Share on other sites
:)

Share this post


Link to post
Share on other sites

Alittle progress here, I will try to add the bracing tonight and maybe get the port built.

Boxrebuild2_zps7a47728d.jpg

Boxrebuild_zpsae493019.jpg

Boxrebuild1_zps14ca90d3.jpg

Boxrebuild3_zpsaf654f4e.jpg

boxrebuild4_zpsb3dadc6d.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

    1. Recent Topics

        • 17 comments
        • 115 views
        • 393 comments
        • 31,985 views
        • 2 comments
        • 643 views
        • 5 comments
        • 1,400 views
        • 6 comments
        • 991 views
        • 1 comment
        • 906 views
  • Similar Content

    • By Burke
      1. Product: 2 Fi SP4 18s with Carbon Fiber Dust Caps
      2. Specs: Both are dual 1 ohm (0.7 ohm)
      3. Description/Condition: Ran them for a little under a year on low power (Audioque 2200). Magnets have some scratches but the surrounds, baskets, spiders, and coils are in excellent condition. Does not include the original gaskets. A couple of the pictures are next to a 10" Kicker "Competition" (lol) for size comparison.
      I threw out the original boxes some time ago, but Fi was nice enough to send me two brand new boxes to ship them in. So these will ship in original Fi packaging.
      7/10 Cosmetically
      10/10 Mechanically
      4. Price: Asking $900 SHIPPED OBO for the pair. Because they are dual 1 ohm, I would like to keep them as a pair. NO TRADES, just trying to get rid of all my stuff.
      I'm located in Huntsville, AL 35810. Would be willing to drive to meet someone within reason.
      5. Pictures:











    • By cloud77
      12" Fi BTL UFO D2
      Item(s) for Sale:
      12" Fi BTL UFO Dual 2 ohm
      Item(s) Description/Condition:
      -pie slug style Fi UFO motor
      -12" 12 spoke aluminum frame painted hammered gray
      -PSI recone rated for 3k RMS
      -triple sewn leads
      -quad spiders
      -Longer coil to mimic Fi's HiXmax coil. Good for daily. Uses .25" spacers to accommodate coil length.
      -HD pulp cone
      -High roll surround
      This sub has been nothing but great to me. Can't say enough about it. Sadly I have just sold my amp and made a bunch of space in my trunk for a lot more business. ( (2) 12"s )
      This 12" can do it all..handled my MMATS m3000.1 with ease, hit the lows, and was great for a daily woofer.
      Has always been on a good supporting electrical cast. I am pulling the sub tomorrow because I'll be pulling my amp as well. Can take more pictures for people with more interest then.
      Recone has a date of 9/xx/14 and actually didn't use it for about 4 weeks it was installed because I had to wait on a warranty claim on a battery.
      There is a bit of a glue splotch on the top plate, but no biggie, just CA. bottom of motor looks mint.
      Minimal chips in ferrite. Included is the motor boot and 12" gasket.
      Price:
      275$ plus shipping
      Shipping and Miscellaneous Item Information:
      Ask me for a shipping quote
      Will be using UPS.
      US 48 only.









    • By antoinez28
      I have for sale two crescendo bc 2000 for sale both are about 1 1/2 years old good deal power by two g31 batt juciebox, and crescendo logic...pushing 2 18" ethos strapped at 2ohm never seen below 12volt...I had to push them....got warm in this hot Kansas City weather...both will come with bass noobs and one with owners books the other might be lost during a move with both boxes from crescendo...I love these things they both went to db-r for repair but nothing major I had a bad ground and thought I blew them both
      Crescendo BC2000D
      Stable down to .5ohm on strong electrical.
      Up to 16.8v capable on BC2000
      Remote Bass/Gain knob with Clipping Indicator.
      Custom tooled, proprietary Multi-piece Thermal optimized Heatsink with patent pending interlocking slide-out CNC engraved top plate.
      2 stage copper anodized removable top plate.
      Silver plated high end hard-wired Tiffany RCA inputs and oversized 1/0 Power/Ground Inputs for efficient current transfer.
      Overbuilt Power supply with heavy copper traces and Military spec PCB/heavy duty standoffs for extreme vibration resistance.
      Manufactured using some of the highest quality and most reliable electrical components, with many 3% tolerance components throughout.
      Full 4-Stage Intelligent protection Circuitry 1 Year/1ohm comprehensive warranty with 2 year/.5ohm optional extended warranty available.
      Rated Power Output(RMS)
      Clean RMS power on 13.8v standard electrical system:
      Ohm Load
      BC2000d
      1ohm
      2250
      2ohm
      1100
      4ohm
      700
      Dimensions: BC2000: 16"L x 2.75"H x 9.5"W (at widest point)
      I want 550.00 for the pair or 300.00 each shipped no lower
      I'm upgrading to a bigger amp dd-m4a


  • Recent YouTube Posts

×