![mklett33](http://www.soundsolutionsaudio.com/forum/uploads/profile/photo-thumb-5311.jpg)
Are you about to make a thread asking about box design? READ THIS FIRS
By
mklett33, in SPL & SQ / Fabrication
-
Recently Browsing 0 members
No registered users viewing this page.
-
-
Recent Topics
-
- 1 comment
- 111 views
-
- 1 comment
- 107 views
-
- 1 comment
- 103 views
-
- 1 comment
- 147 views
-
- 1 comment
- 270 views
-
- 3 comments
- 232 views
-
-
-
Similar Content
-
By codester
Been awhile since Ive been on here but I Just purchased back my 2x 15" SSA Icon subs I first purchased around 11 years ago.
I have/ had them in a 7.2 cubic foot box net tuned to 32 and it sounded great on the bass music and rap/ hip hop I used to listen to but not amazingly accurate/ punchy on rock, etc.
Im looking to only use one of them in my 2010 Ram 1500.
I currently have a 10" JL W7 in a sealed box in the truck and it sounds great and I love it but doesn't quite have the output Id like and planning to put 1 of the Icons in the truck.
Im considering either Ported or sealed. I now listen to mainly bands like chainsmokers, club music, alt rock, heavy rock, and a bit of edm, etc. Looking for it to be very accurate on kick drums but also hit hard so you feel it in your chest.
According to SSA optimal ported is around 3.5-4 net tuned to around 32hz but Im thinking about tuning a bit higher. Ive done some winisd modelling but its been a long time and just wanting to hear thoughts on these designs.
My max dimensions are 20" wide, 24" deep by 22" high.
This is one design i'm considering, is 2.25" wide too thin for port width? im worried about port velocity and noise
\
Or if I go sealed this is what im thinking.
Thanks again for any help
-
By SpeakerBoy
I'm having trouble getting the right mass to tune a PR enclosure
I got ~1200 grams when I used a calculator online but 158 grams when I used the mass of the air in the port as my starting point. I feel like i'm missing something.
i'm aiming for 8cu @ 26hz with a single 18" and two 18" PR's
What do I need to do to get the correct calculation? The reading seems straightforward but I keep getting these two opposing answers.
Thanks,
-Chris
-
By DedicatedEnthusiast
Hi guys I was wondering whether standard polyurethane or a UV activated resin would be better for applying directly to MDF wood in order to protect it from the elements of rain ice and snow basically is one product more durable or reliable than another with respect to weather-proofing wood thanks
-
By SoundQubed
Our partners over at Atrend USA are offering up a sweet deal on all SoundQubed enclosures for the month of February.
15% off any enclosure
Start Date 2/9/2015 - End Date 2/16/2015
PROMO CODE:
https://atrendusa.com/soundqubed
-
-
Recent YouTube Posts