Jump to content
Mark LaFountain

Welcome to the IHoP v.2

Recommended Posts

5 hours ago, j-roadtatts said:

Perhaps talk to some local mechanics and see who they use, and who to avoid.

I like that idea so much it is all that I have done.

Even drove down to TPI Specialties to ask them.  No cigar.  My effin' neighbor works at Dynotech and he doesn't know either.  Stupid 6l80's must not fail all that much.

Share this post


Link to post
Share on other sites
7 hours ago, ///M5 said:

How would you guys shop for a transmission shop if you knew no one.  I've been such a DIY'er that I really have no recommendations locally.  It is for a 6L80e and I want a mostly stock rebuild with bigger clutch packs.  Nothing fancy as the flying pig doesn't need to fly any higher.

I would get an exploded view of the assembly and all the specs and do it myself.

Might be a fun hands on for you and the little men.

Share this post


Link to post
Share on other sites
40 minutes ago, topgun said:

Sailor fixes everything... right? 

In most cases I have come across.

Share this post


Link to post
Share on other sites
17 minutes ago, nem said:

I would get an exploded view of the assembly and all the specs and do it myself.

Might be a fun hands on for you and the little men.

If I didn't have kids and/or a job that made me travel I would as well.  Also doesn't help that it is currently my only car.

Share this post


Link to post
Share on other sites

Are you rebuilding or replacing with a pre built unit? 

Share this post


Link to post
Share on other sites
1 hour ago, topgun said:

Sailor fixes everything... right? 

At the very least it makes it more fun

Share this post


Link to post
Share on other sites
8 minutes ago, topgun said:

Are you rebuilding or replacing with a pre built unit? 

You can't replace.  Tcu is part of the valve body.  Local rebuild...

Share this post


Link to post
Share on other sites

I know the can't isn't set in stone but it is more money and hassle

Share this post


Link to post
Share on other sites

Plus I want bigger clutch packs

Share this post


Link to post
Share on other sites

God damn mower is fucked.  Son of a fucking bitch I'm pissed off.  

2 hours to get a belt on to find out the clutch isn't working right.  It goes into gear and won't come out no matter if I have the clutch down or not.  So cranky.

Share this post


Link to post
Share on other sites
23 hours ago, ///M5 said:

You can't replace.  Tcu is part of the valve body.  Local rebuild...

 

I'm rather surprised local dyno shops can't recommend anywhere.  Failure in networking on their part.  

Share this post


Link to post
Share on other sites
2 hours ago, topgun said:

 

I'm rather surprised local dyno shops can't recommend anywhere.  Failure in networking on their part.  

Every place they recommend says 4l80 swap and that 7k I am not spending

Share this post


Link to post
Share on other sites
Quote

A Turkish family poisoned themselves and more than 20 guests at a dinner party they threw to celebrate recovering from food poisoning. 

 

Share this post


Link to post
Share on other sites
Just now, ///M5 said:

Every place they recommend says 4l80 swap and that 7k I am not spending

Cause they're lazy bastards that don't want to learn the new scary trans six speed Hydramatics.

Tried getting a hold of Circle D in Houston?

Share this post


Link to post
Share on other sites

Swap for a 4l80, seems like a pain.  Can a dealer just do the rebuild for you with upgraded parts and then you get a loaner too.  

Share this post


Link to post
Share on other sites

15, 30 round AR mags loaded and 45 stripper clips ready to reload the mags!

Share this post


Link to post
Share on other sites

< has issues...

Share this post


Link to post
Share on other sites
2 hours ago, Penguin4x4 said:

Cause they're lazy bastards that don't want to learn the new scary trans six speed Hydramatics.

Tried getting a hold of Circle D in Houston?

Circle D is $7k for a performance build + shipping.

Share this post


Link to post
Share on other sites

The Russian I haven't used since moving back from Moscow in 1991 is all of a sudde b3coming useful to read the news feeds on here.

Share this post


Link to post
Share on other sites

I would just like to find anyone local that has built a non stock one successfully

Share this post


Link to post
Share on other sites

Must be why my translator keeps popping up. 

Share this post


Link to post
Share on other sites
13 hours ago, topgun said:

Swap for a 4l80, seems like a pain.  Can a dealer just do the rebuild for you with upgraded parts and then you get a loaner too.  

Dealers don't rebuild.  They simply remove old parts and install new.

Share this post


Link to post
Share on other sites

I don't do anything with stealerships

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×