my whole front stage is fried

[chainsaw 5]

I have had weird issues off and on with my amp (teac 200.1) and my components( phoenix gold radials ran passively). little things like sounding muffled at start up in cold weather. I bought the amp on here a few years ago for $15, so no big loss. The other day i was involved in a fender bender and the power wire from the front battery to the back came undone. I didn't notice this until a few days ago. The tip off should have been that the sound deteriorated over the course of a week . Yesterday I took an old speaker and some wire and tested the amp and rca's for a clean signal. Left channel is dead and right is static-y. I said screw and attempted to run my components off the HU and still had static. I pulled out the left set and the wire going to and from the crossover was all dirty and corroded. I tried a Pioneer 6x9 i had lying around and still static and then silence. What the hell do I do now? ( besides the obvious)

[chainsaw 5]

double post. admin please remove