2 12" zcons 4-6k trunk wall

[frogcase2002 393]

I've hears that the ddz1 is meant for only burping purposes and won't be useful in a daily setup at all.

one of the worst amps DD ever made.... and normally a no go under 1 ohm

Thanks, a friend of mine has one and was thinking about getting it from him...... I know I need A LOT more power to these things

[frogcase2002 393]

Just thought I would post some enclosures i have built lately

[frogcase2002 393]

More

[frogcase2002 393]

.

[frogcase2002 393]

I know how to put pictures up now!!!!!!!!!! Lol

[SMpaintball78 58]

^^ how you doing it? lol

[grayta 23]

Nice enclosures!

[Dexter Chaos 14]

i use photobucket for pics.

[frogcase2002 393]

^^ how you doing it? lol

Sending them to my kindle and it just lets me put them on here

[frogcase2002 393]

Selling these in the classifieds but couldn't upload the pictures there

Edited July 26, 2013 by frogcase2002

[Aaron Clinton 2,372]

Nice enclosures, just need more of them to have SSA subs in them.

[frogcase2002 393]

Nice enclosures, just need more of them to have SSA subs in them.

I try lol. I show everyone my zcons and there the most impressive subs anyone has heard, couldn't ask for a better 12

[ricksi30 923]

I know how to put pictures up now!!!!!!!!!! Lol

[frogcase2002 393]

I know how to put pictures up now!!!!!!!!!! Lol

O yea. Lol

[pmureika 31]

Nice enclosures, just need more of them to have SSA subs in them.

I try lol. I show everyone my zcons and there the most impressive subs anyone has heard, couldn't ask for a better 12

Unless it's Evil.

[frogcase2002 393]

Nice enclosures, just need more of them to have SSA subs in them.

I try lol. I show everyone my zcons and there the most impressive subs anyone has heard, couldn't ask for a better 12

Unless it's Evil.

if there were some 12s that were evil they would be in my car would be nice

[frogcase2002 393]

DIBS ON THE FIRST EVIL 12S!!!! lol

[frogcase2002 393]

How much yal think them mojo's are worth?

[frogcase2002 393]

What do you think the best way to get this to stay up is?

The bass broke the clip off of where the clip gos. So cant just buy a new clip for it. Tryed using this sticky back Velcro I had but there isn't really a flat enough surface for it to stick good so keeps peeling off.

[Quentin Jarrell 671]

Superglue the plastic back on that the clip attaches too.

[shizzzon 461]

yea, i dont think velcro would work on that period.. It's no surface area on the A pillar itself is the problem.

[frogcase2002 393]

Superglue the plastic back on that the clip attaches too.

What kind would be best you think? I got some ca glue. Amazing goop. And some kind of 10 second apoxy stuff... or something different?

[shizzzon 461]

I don't know the application use for any of those definite, but find and rule these out-

 

Make sure your adhesive works within the temperate ranges your car will see.

 

I tried using Loctite 2 part epoxy one time in the car and stuff kept popping off.. Found out it was only rated for 120F.

 

Make sure the adhesive can withstand 180F minimum (gorilla glue epoxy is rated for this and works fine)

Make sure the adhesive adheres to plastic and\or metal.  As far as i know, all 2 part epoxy resin\hardener does as it doesn't rely 100% on the material it's bonding to but the viscosity of the adhesion itself helps keep things in contact.

 

Make sure the Pot life and Total cure time can be accomplished as well.

 

That should be it.

[frogcase2002 393]

I don't know the application use for any of those definite, but find and rule these out-

 

Make sure your adhesive works within the temperate ranges your car will see.

 

I tried using Loctite 2 part epoxy one time in the car and stuff kept popping off.. Found out it was only rated for 120F.

 

Make sure the adhesive can withstand 180F minimum (gorilla glue epoxy is rated for this and works fine)

Make sure the adhesive adheres to plastic and\or metal.  As far as i know, all 2 part epoxy resin\hardener does as it doesn't rely 100% on the material it's bonding to but the viscosity of the adhesion itself helps keep things in contact.

 

Make sure the Pot life and Total cure time can be accomplished as well.

 

That should be it.

Thanks man

[frogcase2002 393]

These zcons are insane. My car is taking a beating. And my head lol