Jump to content
onebadmonte

DIY Soundgroup Zephyr build

Recommended Posts

What's up homies? It's been a while since I've posted anything meaningful. Here is my latest audio venture. It's the Zephyr kit by the latest audio start-up, DIY Soundgroup. smile.png

 

A little history/search words about this kit. It's fashioned around the Econowave style, although there is nothing econo about this kit. It was designed by Jeff Bagby. And that's about all I know. 

 

My goals: 

1. To have a reference sound system so I know what to listen for when tuning my auto sound system.

2. Be able to achieve nutty ass rock concert levels.

3. Finally be effing cool.

 

Here is my start, wood!

 

DSC06648_zps4c46e331.jpg

 

Box sides coming together.

 

DSC06655_zpsdb819baa.jpg

 

The kit came with a pre-cut baffle. The design calls for a double front baffle, so that meant I needed to cut a second baffle with matching holes. I started off by gluing gluing the second baffle on to the pre-cut baffle. To keep everything lined up I opted to dowel the two baffles together using my trusty but useless drill guide. biggrin.png

 

DSC06663_zpsc485feaf.jpg

 

With the baffles glued I drilled some pilot holes for the jig saw.

 

DSC06672_zps744d0292.jpg

 

My work with a jigsaw. :-0

 

DSC06676_zpsb1f4bf90.jpg

 

A close up of my fine craftsmanship. biggrin.png

 

DSC06677_zps61a87ac2.jpg

 

You didn't really think that was it, did you? Time to clean up the carnage from the jigsaw.

 

DSC06685_zps57f7ed45.jpg

 

Viola, finished baffles. smile.png

 

DSC06686_zpsc243a300.jpg

 

A couple of close up shots.

 

DSC06689_zps3c52a9bb.jpg

 

DSC06688_zps50085053.jpg

 

More on the way. smile.png

 

 

Share this post


Link to post
Share on other sites

whoa!!!

Share this post


Link to post
Share on other sites

Tuned in, I know this is gonna be good!

Share this post


Link to post
Share on other sites

You're cuts are so freaking good man.

Share this post


Link to post
Share on other sites

I have purchased a few things from DIY sound group. Their products are awesome, cuts are perfect and those waveguides are top notch.

Share this post


Link to post
Share on other sites

Great start, waiting for more

Share this post


Link to post
Share on other sites

Hurry up!  adhd.gif

Share this post


Link to post
Share on other sites

Thanks guys. More is on the way, you all just got to be patient with this old man. :D

Share this post


Link to post
Share on other sites

Here is a little update of my shenanigans. :D

 

A quick mock up of my high tech bracing.

 

[DSC06690_zps73014e36.jpg

 

I figured I use a nice $2 terminal cup I picked up at the local Radio Shack on clearance on these speakers. In similar fashion to the cut outs for the baffle I started off with some pilot holes.

 

DSC06693_zpsb6ed92b6.jpg

 

Since this time around I made a steel template at work to guide around the router. This is the "before" routing.

 

DSC06694_zps97eaca67.jpg

 

"After" routing. :)

 

DSC06695_zps3d8a81d3.jpg

 

With the rear panel done and glued in place I trued up all the edges using the same bit as on the router table, now just on a hand held router. Here is the box ready for a little trimming.

 

DSC06705_zpse6a19625.jpg

 

The end result, some crisp edges. :D

 

DSC06707_zps48baafdb.jpg

 

Although the sharp edges are nice I'm more of a round over kinda guy. :D

 

DSC06715_zps242c70be.jpg

 

:)

Share this post


Link to post
Share on other sites

Get urself a Fukuda Jig Tool for those rectangle/square holes. You'll thank me later.

Share this post


Link to post
Share on other sites

Nice woodworking there sir. I love good craftsmenship.

Share this post


Link to post
Share on other sites

I like your jig.  I made some on our CNC plasma.  Most of the time for square cutouts I just make a jig with strips of old MDF.  Works great and its basically free.

Share this post


Link to post
Share on other sites

What's the reason for cutting out with the jig saw first then router? Couldn't you have just used the router?

Share this post


Link to post
Share on other sites

What's the reason for cutting out with the jig saw first then router? Couldn't you have just used the router?

 

It's a heavy cut for my weak ass router to begin with, secondly once the drop breaks loose, it's in Gods hands on whether or not it kisses the router bit and goes flying in your face. O_o

Share this post


Link to post
Share on other sites

What's the reason for cutting out with the jig saw first then router? Couldn't you have just used the router?

It's faster and prevents burning up bits and makes for a better line.

Share this post


Link to post
Share on other sites

Nice !
I'm waiting for ...la suite :)       tuned in for more
Round edges gives a much better touch. Well done, sir.

Share this post


Link to post
Share on other sites

Nice !

I'm waiting for ...la suite smile.png       tuned in for more

Round edges gives a much better touch. Well done, sir.

 

Thanks. Things are a little slow going with school for the little one just starting. :\ The end is near, I hope. :P

Share this post


Link to post
Share on other sites

Here I start tackling the crossovers. Not sure about what best practices really are for these things. I've heard here and there that it's best to place inductors as far apart and have the axis of them perpendicular to each other. Like all things audio there are compromises to be made, available space being one of them. Manufacturability (is that even a word?) being another. Since I am not constrained by either, here is what I came up with. :P

 

I was able to snag some abs scraps from work as the foundation for my crossovers. Here I turn round scraps to nice rectangular boards.

 

DSC06691_zps997bea5f.jpg

 

Not much to show off in the assembly of the crossovers but I will mention that I opted for a steampunk / old school vacuum tube amp style point to point soldering technique.

 

Finished crossovers.

 

DSC06708_zps7220df62.jpg

 

The compression driver crossover.

 

DSC06711_zpsd030e8cb.jpg

 

The woofer crossover.

 

DSC06709_zps43b0dcab.jpg

 

Tata for now, exit stage right. :P

Share this post


Link to post
Share on other sites

Looking awesome so far. Keep up the good work. And definitely keep those pics coming.

Share this post


Link to post
Share on other sites

You're always up to something crazy cool! Looking good!

Share this post


Link to post
Share on other sites

Looking awesome so far. Keep up the good work. And definitely keep those pics coming.

 

Thanks. I'll get some more pics on the way soon. :)

 

You're always up to something crazy cool! Looking good!

Ha ha, thanks man. :) I just need to find a little more time to getting this project done. :D

Share this post


Link to post
Share on other sites

I'm back with another update on my endless built. :D This time around I opted to add a little automotive style sound deadener to the back side of the waveguides for a little piece of mind. I started off by making a paper template of the area to be covered.

DSC06656_zpscfb9695d.jpg

With the template done I moved on to cutting the sound deadener.

DSC06659_zpse2174ed3.jpg

Guess what I did next. Yep, I puts the sound deadener on the waveguides. Here's a little before and after all in the same pic.

DSC06662_zpsac2d99cf.jpg

With that out of the way I slapped the CD on the WG. :D

DSC06666_zpsd31118e2.jpg

Thanks for watching. :)

Share this post


Link to post
Share on other sites

nice looking drivers, what are they?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×