Jump to content
Sign in to follow this  
Maddenkid2011

WTT - Fi BL 15" and RF T-1000bd

Recommended Posts

Up for trade is my (original owner) 2010 15" Fi BL and my Rockford Fosgate T-1000bd.

 

Both 10/10 working condition. Sub is 9/10 cosmetically and the amplifiers cosmetics are a 8/10.

 

My next install is SQ oriented so I would trade for:

 

Sundown E/SA, Fi Q, SSA D/G/Icon, etc. (Something that can perform sealed andcash can be mixed in with trade.)

 

The amplifier traded for something in the 600rms-800rms range or a solid 4-channel.

 

Im downsizing my setup so almost anything is on the table for a possible trade. Ill listen to any offers.

Edited by Maddenkid2011

Share this post


Link to post
Share on other sites

Pics will come tomorrow sometime after work. In the meantime imagine a pristine 15" Fi BL and an aesthetically pleasing older model T-1000bd.

I'm hoping for some serious inquiries before I uninstall everything for pictures. I don't like to go 1 car ride without them :)

Share this post


Link to post
Share on other sites

Dual 2 or dual 1 ohm? How much if you just sold the equipment straight out?

Share this post


Link to post
Share on other sites

I have a pre-09 FI Q 15" with a newer recone and a mmats d100hc.  This is my girls car's set up

Share this post


Link to post
Share on other sites

Dual 2 or dual 1 ohm? How much if you just sold the equipment straight out?

Dual 2 ohm

$230 + shipping for the sub

$200 + shipping for the amplifier

 

Could probably do $400 + shipping for the pair

Edited by Maddenkid2011

Share this post


Link to post
Share on other sites

I have a pre-09 FI Q 15" with a newer recone and a mmats d100hc.  This is my girls car's set up

I was hoping for something smaller than 15".

 

A beefy 8"/10"/12" would be best. Ill keep the Q in mind though, thanks!

Share this post


Link to post
Share on other sites

Proof that the sub and amp exist. Shortly after it was installed a few years ago. Still pounding like a champ.

 

 

Edit: Apparently I dont know how to embed a video...

Edited by Maddenkid2011

Share this post


Link to post
Share on other sites

I don't know if you were planning on just buying anything. I have 1 Xcon 12 d1 and another Xcon motor with a 12" Xcon recone and basket that should be here in a week or so.

Share this post


Link to post
Share on other sites

I don't know if you were planning on just buying anything. I have 1 Xcon 12 d1 and another Xcon motor with a 12" Xcon recone and basket that should be here in a week or so.

Pm'ed

Share this post


Link to post
Share on other sites

I don't know if you were planning on just buying anything. I have 1 Xcon 12 d1 and another Xcon motor with a 12" Xcon recone and basket that should be here in a week or so.

Pm'ed

Replied!

Share this post


Link to post
Share on other sites

Update with pictures!

 

I forgot about the scratches on the face plate. Its pretty beat up from sitting in my trunk for the past two years. I never used it so I forgot to mention it.

 

Besides the face plate the amp is 9/10 cosmetically and 100% fully working. Any other marks, other than the ones on the face plate, are from the picture being blurry (apparently there's some quality loss when you upload from your mobile)

 

 

 

0D772594-AA9F-49FC-9AAF-E9146992408F-163C7B70059-CA0D-4076-9E14-EA8BE7A79993-1638D645D22-6712-4837-9543-AF6F1109EEEC-163

 

 

The sub has zero marks and is a 10/10 cosmetically and 10/10 mechanically. All blemishes are from it being dusty. I really don't want to take it out of the box, due to the box being old and shitty and lacking new holes to drill into, but I will for serious inquiries obviously.

 

97FBA9B6-2DC3-4FE4-9FB5-6C516F26B6E6-158

 

650C8C96-613B-4EAE-8939-1A5405792D2B-163

 

Not sure if it's taboo to post your number but I prefer to communicate and exchange pictures through text. Feel free to contact me at 810-610-6629. I'll be more than happy to send you any pcitures you'd like and talk about trades and pricing.

Share this post


Link to post
Share on other sites

pics need your name and date.  motor shots will help sell, along with coil readings

Share this post


Link to post
Share on other sites

pics need your name and date.  motor shots will help sell, along with coil readings

I could do the name and date tomorrow but the video under the same username I posted from youtube should be solid proof. I don't have access to a DMM for the coil readings. I know a person's word isn't worth much on the internet but I can assure you and every potential buyer that the sub and amp are in perfect working order.

Share this post


Link to post
Share on other sites

Do you still have the T1000? Is pm me I may have trade

Share this post


Link to post
Share on other sites

Almost a year old thread bud....probably better off pm'ing him as I doubt he keeps checking it. Probably an unrealistic inquiry

Share this post


Link to post
Share on other sites
Sign in to follow this  

×