'93 Honda Prelude

[ludeman 86]

What I've been up to: I got a good deal on a Zv.4 motor a few months ago, I got inspired to do a single 10" SPL build for fun. Recone consists of D1 NSV2 coil, 2 layer SPL spiders, SPL surround & carbon cap! All from Sundown.

Edited December 31, 2015 by ludeman

[ludeman 86]

All built up:

Please excuse the excess glue on the cone & surround, the carbon cap didn't feel secure enough for me! Gonna start on boxes in a few!

[ludeman 86]

Finally got time to have fun! Box is 1.3c/f tuned to 50hz with a full length 6" PSP port.

Did a 147.7 @56hz outlaw, 144.5 @53hz sealed up.

Edited December 31, 2015 by ludeman

[jcarter1885 995]

Nice score, whats the goal with this setup? Love the external port

[ludeman 86]

Thanks! Wanted to see if I could break the 150db with a single 10"! Next, Ordering a 2nd one and maybe getting more power soon.

Edited December 31, 2015 by ludeman

[Randal Johnson 544]

Nice Setup

[ludeman 86]

Thanks! Was over looking my wires and realized 2 runs out of the 3 of 1/0 is CCA! So new OFC wire will be ordered today. (just prepping for more power)

[ludeman 86]

Ended up buying 25ft of 2/0 Skyhigh vs. 50ft of 1/0!

[ludeman 86]

Good day to rewire!

Edited February 20, 2016 by ludeman

[ludeman 86]

After rewire and tune up starting voltage is @14.4 from 14.2, rpm warm idle is down to 750 from 900rpm!

[Aaron Clinton 2,372]

What did you change?

[ludeman 86]

Changed all wire to OFC, replace all connections with SHCA copper lugs scraped or increased the size of the paint surface for connections to frame! Went with NGK plugs, MSD wires and changes oil to Royal Purple full synthetic.

[ludeman 86]

The only picture I took: 

SHCA copper 2/0 fuse holder!

[Mark LaFountain 1,054]

looks great, good output for the equipment you have.

[Aaron Clinton 2,372]

I am going to try to get to that show in Glen Burnie.

[ludeman 86]

Hit up a show yesterday! Put in the old Tantrics back in for good measure ended up doing a 151.6 @56hz before the dust cap launched. No time for a retry.

[ludeman 86]

[Aaron Clinton 2,372]

Great scores.

[ludeman 86]

On February 22, 2016 at 9:56 AM, denim said:

What did you change?

 

On February 22, 2016 at 6:56 PM, ludeman said:

Changed all wire to OFC, replace all connections with SHCA copper lugs scraped or increased the size of the paint surface for connections to frame! Went with NGK plugs, MSD wires and changes oil to Royal Purple full synthetic.

Forgot to add that I replaced the under hood fuse box to battery wire to 4 gauge ofc.

Edited March 31, 2016 by ludeman

[ludeman 86]

It was fun building and competing with her, she is replaced:

stayed tuned......

[Billy Jack 145]

Nice setup. I love those cactus amps there mean little outfits.