4th Gen Firebird/Camaro build logs?

[ROLEXrifleman 0]

Can anyone point me in the direction of some? Trying to get some ideas for my Pontiac. Need to see what people have put in without tearing out the back seat. I have two 12W7's, two X12's and two Zv4's at my disposal.

 

TIA

[jonbearsmt 919]

well steve had the mother of all 4th gens but... no back seats

[ROLEXrifleman 0]

Gotta keep the back seat, I've tried to work around that but she's not budging! 

[gprestonmoto 89]

Gotta keep the back seat, I've tried to work around that but she's not budging! 

Steve's was bad as f***

[Sencheezy 689]

Smaller subs.

[ROLEXrifleman 0]

Smaller subs.

I think I can find 4-4.5 cubes for one Zv4

[Sencheezy 689]

 

Smaller subs.

I think I can find 4-4.5 cubes for one Zv4

 

 

That sounds a little bit better, thought you was planning to use 2 12s. That may be pushing it because IIRC, you have that huge as lump in the back inside the truck lol.

[ROLEXrifleman 0]

Your right about the hump. It kills all the space. And I'm going to be fighting for those 4 cubes either way. This "trunk" sucks.

the good thing is with it being a hatch it should sound good.

If i can do a zv4 with 2.5K on it I should be ok

[Sencheezy 689]

Your right about the hump. It kills all the space. And I'm going to be fighting for those 4 cubes either way. This "trunk" sucks.

the good thing is with it being a hatch it should sound good.

If i can do a zv4 with 2.5K on it I should be ok

 

um, enclosure sir. Please make sure you can fit that much space for amp, wire, box, and battery(s). Remember, uneven planes in your enclosure can produce ill results.  I always aim for the box to be as even as possible. I know that hump has a big dip, so what I mean is, that dip should not be used as space for the enclosure.