Jump to content
Sign in to follow this  
DedicatedEnthusiast

Dual 12'' Fi SSD's with standard copper coils and cooling

Recommended Posts

Got two 12'' Fi SSD's for sale that are literally less than six months old. They sound absolutely amazing in fact my ears were ringing after having listened to them for ten to fifteen minutes straight or so just the other day. They come with stock copper coils (meant for daily musical play) and cooling option for an additional 2-500 watts or so of increased power handling (giving each speaker an average of 1200-1500 watts RMS power handling for a total combined amount of 2400-3000 watts power handling) depending upon the install. The price for the pair is $450 shipped to your door in all of Fi's original packaging. Shipping alone runs right around $80 for the pair even if new from Fi so the price per speaker outside of shipping cost is actually about $185. These things look and sound practically brand new. The ONLY reason I am selling them is because i ended up getting a much larger than anticipated alternator installed and would like to take advantage of its abilities with larger more powerful speakers soon. It may be sort of hard to see my SSA username at the top of my sales sheet in the pictures below due to the lighting when they were taken but if you tilt your computer screen back and away from you I find that it is much easier to see that way. Please feel free to PM me with any additional questions or concerns:)

 

532_zps456ed79c.jpg

 

533_zps7172c5da.jpg

 

535_zps2305c549.jpg

Edited by W140
fixed the images

Share this post


Link to post
Share on other sites

use the img option in photo bucket and the images will come up automatically.

Share this post


Link to post
Share on other sites

Thanks how exactly do I go about doing so?? The pictures do come up automatically for me btw.

Share this post


Link to post
Share on other sites

Unless they have already been fixed as indicated by the edit above by W140 (thank you for that)

Edited by DedicatedEnthusiast

Share this post


Link to post
Share on other sites

that hand writing tho LOL 

 

GLWS, great subs!

Share this post


Link to post
Share on other sites

Haha thanks Sencheezy and FocusOn20s I would really like to sell them both as a pair at least for now

Share this post


Link to post
Share on other sites

Closing sale for the time being may re-post with a better price soon

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

    1. Recent Topics

        • 17 comments
        • 178 views
        • 393 comments
        • 32,175 views
        • 2 comments
        • 670 views
        • 5 comments
        • 1,446 views
        • 6 comments
        • 1,015 views
        • 1 comment
        • 961 views
  • Similar Content

    • By jcarter1885
      Deadener should be here Friday. I doubt I'll get any work done since there is a car show in town this weekend but I want to do something. I will mount DSP and try to get the ground side of the Big 3 done sometime this week.
       



    • By MJS_IraggiAlts
      PRV AUDIO Vocal Speakers....  
      This may not make sense initially, but a high-quality speaker will have less bandwidth than a lower quality speaker... (for the most part)
      Just like a 3- or 4-way system is always better than a 1- or 2-way system.  The narrower the bandwidth the speaker must play the cleaner it will sound.  This will also keep you from asking the speaker to play up to its upper and lower frequency limits which are where it starts to sound "forced" to play those frequencies
      Pro Audio speakers are nothing new to car audio, but I see consumers not really knowing how to properly use them and having some issues which is understandable.  These are totally different than your standard coaxial speaker

      If you look at the graph on the 6mr500ndy, which sounds amazing, you'll see that it can play from 90hz to 12,000hz... but if you narrow it down to what is plays "best" and more "naturally" it’s closer to 200hz to 10,000hz.   Yes, it can play down to 50hz but not efficiently and not as well as 200 and up. Very low volume that would be fine but in what we do with the speaker you will want to cross it over closer to 200-300hz

      I get a lot of PMs asking if this speaker will pick up where my subs leave off?   … around 60-80hz.  I say no but the specs say "yes”. 99-13k so that may be a little confusing if you don’t look at the graph and understand what information it has in it
      So, for someone interested in using this speaker as a voice speaker, which I HIGHLY recommend, you will also need a "midbass" speaker to go with it such as a 10mb800 or 10mb500 or 8mb450.     
      This leads me to another piece of information.  PRV model numbers have an "MR”, “MB", "SW" or "W" in between the size of the driver and wattage of the individual speaker. MR=midrange

      MB=midbass
      W=woofer 
      SW=subwoofer
      This is a general guideline for what the speaker is geared towards. That doesn’t mean an 8mb450 can’t be used for midrange or and 8mr400 can’t be used for midbass.  That is where the graph and interpretation of the graph comes into play
      There is a lot more that goes into designing your front stage or your "voice" speakers that one of these days I’ll try and have a more in depth write up.   The possibilities are endless...



    • By DaViD12464
      Hello, I have problem with choosing speakers (I'm just new in car audio), but I got 2 power amplifiers - CONCORD CA 2075 (300W),they are both 2 channel. One of them is bridged and connected to bass tube (raveland 400W). Second one will be connected to 4 speakers (2 x front 165mm, 2 x rear 130mm) , and I need to buy them, but I don't know how to compute how much Watts those speakers should have when i will connect them to this 300W power amplifier, which would have 2 speakers connected to + and - "left" and next 2 speakers for + and - "right". (You don't need to give me models of speakers cause idk if they will be available in my country, just give me how much watts they should have and I would really happy ;D)
      And my question is can i connect wires going out of radio (normally to speakers now they are going to power amplifier) and cinch wires both at the same time??? (just got both with this stuff and I don't especially know if it's right :P

      Ps. sorry for any mistakes caused by my english abilities :/
    • By Joshdashef
      Hello and welcome to my daily headaches! I'll start this build log off with my past setup, my current, and finally update throughout December as I work on probably the furthest this little Civic will let me go.
      My instagram: https://www.instagram.com/joshdashef1/
       
      The Past Build:
      Head unit: Pioneer 80 PRS 
      Mono Amp: Rockford Fosgate Prime 750.1
      Subwoofers: Rockford Fosgate P3D4 12" (two)
      Kicker 4 gauge amp kit OFC
      Stock Electrical (alternator included)
      Did do the big three sometime between here and current build
      Prefab Box: Q-Power Box (Dual 12s)
      Tips: Tesa taping RCA's, Marking RCA's Low/Mid/High or similar, 


      Big Three with loom. Wire was Sky High 1/0 OFC with some 1/2" loom I believe. Old military style terminals (DO NOT USE THESE) they cracked my battery eventually. 

       
       
  • Recent YouTube Posts

×