quick question about my box...need to modify it

[spanky1975 5]

Hello,

 

I have 3x SSA DCON's in a box that I handmade from a design from a member here. I recently bought a new SUV and the box will not fit. The box is too wide by 1 inch. The inside area of the port now is 14 3/8" X 7 1/2" ....if I cut 1 inch off of the port then the new port would be 14 3/8" X 6 1/2".

 

Would this change the sound of the subs a lot or would it be ok to do this ?

Thanks in advance for any help.

[lithium 358]

if you need to take an inch off, the port is the worse section to cut. 

[spanky1975 5]

if you need to take an inch off, the port is the worse section to cut. 

Ok. Thanks. I will cut off of the other side and see how it sounds. I may end up replacing the subs with 2 18's but this is a quick and cheap fix for now. Thanks again.

[lithium 358]

is the port L shaped? if it doesn't wrap all the way around to the other side of the box it might be ok. 

[///M5 2,833]

More specs and details on the box would help us tell you exactly what will happen

[spanky1975 5]

More specs and details on the box would help us tell you exactly what will happen

Here is the link to the thread with my exact box design.

 

http://www.soundsolutionsaudio.com/forum/topic/57667-box-design-3x-ssa-dcon-12s/?hl=%2Bdcon+%2B12%26%2339%3Bs

 

Hope this helps. Thanks