Jump to content
97maxima

Trunk 4th order build

Recommended Posts

Yanked everything out of my trunk and am awaiting recones and baskets to build my 15s to 12s. Cutting down on weight and going back to cap banks, 6 banks of 6 3000F Maxwells. Laid the floor in with 2 cans of foam and fastened it down. Going to wait a few days to see if i have and major buckling from the foam before i proceed with building the rest of it. Will all be built in trunk. Have a ton of Kreg jig tools to get the job done. Will still be running my Tara HD 8000 till and if the HD 10k comes then ill swap them out. Car tends to like a lower peak and it was brought down a tad lower after using another bulk back on my doors. So ill do some MECA with it this coming season. 

 

7589_10203112420957535_35550529502768910

 

Dropping almost 300 pounds of batts should help with the squat i had going on in the rear.

 

186a8f54-52ce-4f66-b01f-9cb96de3f3a5_zps

Edited by 97maxima

Share this post


Link to post
Share on other sites

nice!

Share this post


Link to post
Share on other sites

nice!

Thanks, going to build up the side walls Saturday since the foam has stopped creeping and seems set. Hopefully it will be playing next weekend

Share this post


Link to post
Share on other sites

Good luck with the build

Share this post


Link to post
Share on other sites

nice !!!!

Share this post


Link to post
Share on other sites

Putting in the majority of the work today on my 4th, going for 1 to 2.75 ratio. Could go larger or smaller. All of it will easily be modifiable tho. Dry fitting it now and using a pocket hole jig more the majority of the build. More pics to come after i pickup a few more 2x4s

 

10599221_10203138501089522_7238197410853

Share this post


Link to post
Share on other sites
:popcorn:

Share this post


Link to post
Share on other sites

Moving right along. Nearly 10 cubes inside the shell and that's stopping short of the back seat opening. Have the baffle to build tomorrow and the lid. 

1016471_10203140354575858_29070455755495

10600663_10203140354815864_4360002755329

Share this post


Link to post
Share on other sites

Well wrapping up the build in the next few days. Have to prime the front chamber, finishing gluing the subs and load then and then i can build the loading wall. Otherwise its wired minus some Shca ofc 8 gauge im waiting on for sub wiring. After its finished ill be working towards swapping out my last few batts for cap banks and may do a alt and amp upgrade.

 

 

10271586_10203160952250787_8290732762634

10730807_10203161010492243_3592363835217

1511171_10203160952370790_24823486175545

10557191_10203156087849180_4182031691635

10423909_10203165538965452_8412771337668

10731213_10203165539085455_5819677367981

 

Share this post


Link to post
Share on other sites

Looks badass so far :woot:

Share this post


Link to post
Share on other sites

Looks good is that 4/0 welding

Share this post


Link to post
Share on other sites

Looks badass so far woot.gif

Thanks

 

Looks good is that 4/0 welding

Its all 2/0 minus the alt runs to the rear which are in 4/0

Share this post


Link to post
Share on other sites

Hell yea!!!!!

Share this post


Link to post
Share on other sites

Looks pretty good!!!

Share this post


Link to post
Share on other sites

I didn't know a red Dss logo on the dustcap was an option, looks good!

Share this post


Link to post
Share on other sites

I didn't know a red Dss logo on the dustcap was an option, looks good!

Anything is available to be customized, so if Q didnt do them himself you could get them done yourself.

Share this post


Link to post
Share on other sites

I didn't know a red Dss logo on the dustcap was an option, looks good!

 Red nail polish. Roughed up the silver with fine sandpaper and cleaned it up with rubbing alcohol .

Share this post


Link to post
Share on other sites

looks killer man!! god i cant wait till my Ethos come! 

Share this post


Link to post
Share on other sites

How did it model with both tunings?

Share this post


Link to post
Share on other sites

How did it model with both tunings?

Never modeled anything just built and shrunk the loading wall down. it plays decently flat from 30hz peaking at 44 and remains strong thru vehicle res. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×