Can somebody model a 10" gcon?

[hdrox88 142]

The standard version works as well. Have you tried that?

 

 

 

Try going to their home page and then clicking download
http://www.linearteam.dk/?pageid=winisdpro

 

They don't have a direct link to the newest version from their website, for reasons unknown. The link I got came from their facebook page, you can see it here:

https://www.facebook.com/WinISD

 

The new version really is a lot better, IMHO.

 

When did you download it? The link on facebook was posted Nov. 2011

Edited February 12, 2015 by hdrox88

[pmureika 31]

 

Try going to their home page and then clicking download

http://www.linearteam.dk/?pageid=winisdpro

 

They don't have a direct link to the newest version from their website, for reasons unknown. The link I got came from their facebook page, you can see it here:

https://www.facebook.com/WinISD

 

The new version really is a lot better, IMHO.

 

Does the same thing from the face book site. I hate computers sometimes.

[Triticum Agricolam 15]

The standard version works as well. Have you tried that?

 

 

 

Try going to their home page and then clicking download

http://www.linearteam.dk/?pageid=winisdpro

 

They don't have a direct link to the newest version from their website, for reasons unknown. The link I got came from their facebook page, you can see it here:

https://www.facebook.com/WinISD

 

The new version really is a lot better, IMHO.

 

When did you download it? The link on facebook was posted Nov. 2011

Many times, the most recent was five minutes ago.

[Triticum Agricolam 15]

To the OP, here is a GCON 10 in 2.5 cubes @ 33 Hz, 400 watts:

[pmureika 31]

To the OP, here is a GCON 10 in 2.5 cubes @ 33 Hz, 400 watts:

Thank you not much different then a 2 cu. ft box

[Triticum Agricolam 15]

 

Thank you not much different then a 2 cu. ft box

 

No prob!

Edited February 12, 2015 by Triticum Agricolam

[pmureika 31]

Can you do one for a two cuft. box.

[Triticum Agricolam 15]

Red = 2.5, Yellow = 2.0, Green = 1.0.  All at 33 Hz.

[Thumpper 266]

I don't do this often but here are 3 plots for the 10" Dcon

top is 2.50cf3 middle is 2.0cf3 and bottom is 1.5cf3 ...all tuned at 33hz

 

bottom lines are woofer excursion

 

Edited February 12, 2015 by Thumpper

[Thumpper 266]

oops wrong sub...LOL

 

I'll leave it there ...give me a sec

[Thumpper 266]

 

 

10" Gcon

 

top 2.50cf3 , middle 2.0cf3  and bottom 1.50cf3

 

 

 

 

 

 

[pmureika 31]

 

 

 

10" Gcon

 

top 2.50cf3 , middle 2.0cf3  and bottom 1.50cf3

 

I had a 2005 Dodge Magnum. It was probably my favorite car.

[///M5 2,833]

That plot shows you nothing without the others lol

[pmureika 31]

That plot shows you nothing without the others lol

I have the other one's.

[pmureika 31]

Cool boxes, Very nice work.