98 tahoe doors, 2 6.5s n a super tweet

[lownlouddd 125]

pretty simple set up here
 
Ill let the pics do the talking, step by step guide basically.
 

 

 

 

 

 

 

 

[lownlouddd 125]

 

 

 

 

 

 

 

5 layers of 1.5 oz mat sanded with 80 grit on a DA sander

 

 

 

milkshake applied (3:1 mix of resin to bondo, spread on with a chip brush, saves hella sanding/finishing time, shit sands like butter)

 

[lownlouddd 125]

bout 30 mins of sanding later to 220 grit

 

 

 

these are getting bedlinered but as you can see they are damn close to being paint ready

 

bedlined

 

installed

[jcarter1885 995]

Nice simple and clean. Love the tutorial as well, gives me a better understanding of the process.

[Jason Brittain 22]

How do you attach these to the doors. and how long do these take to make

[///M5 2,833]

What about midrange and midbass?  Huge acoustic gaps to fill there.

[lownlouddd 125]

On 6/19/2016 at 9:58 AM, jcarter1885 said:

Nice simple and clean. Love the tutorial as well, gives me a better understanding of the process.

for sure thats what i do it for!

On 6/19/2016 at 11:03 AM, Jason Brittain said:

How do you attach these to the doors. and how long do these take to make

i glass in 1/4x20 bolts, usually 2-3" long into the base of the door pods through the OG panel and secure with nuts and washers on the back side.

On 6/20/2016 at 9:00 AM, ///M5 said:

What about midrange and midbass?  Huge acoustic gaps to fill there.

the mids are crossed are 60 hz, the door is deadened heavily behind sealing the mids into a small pod if you will, its no 3 way by any means but the mid bass is there, the tweets are, well loud lol.