-
Recently Browsing 0 members
No registered users viewing this page.
-
-
Recent Topics
-
- 397 comments
- 32,980 views
-
- 1 comment
- 47 views
-
- 4 comments
- 112 views
-
- 17 comments
- 282 views
-
- 2 comments
- 717 views
-
- 5 comments
- 1,550 views
-
-
-
Similar Content
-
By slim142
Not sure how many people here know what these are used for or what they are, but I thought I would still post it just in case anybody sees anything they might be interested on.
These are from a project that I had to cancel because I started college a few years ago and money became insufficient to finish it up.
All prices include shipping CONUS. Paypal only please. No international shipping.
Let me know if you have any question. I also take offers if you buy more than one item.
heatware: slim142
eBay ID: presler142
TFC Xchanger 480 Quad Radiator NIB - $95
TFC 120mm Fan Shrouds NIB - $60 for all 4 (each includes red, blue & green LEDS!)
Pentek In-Line Water Filter NIB - $20
Laing D5 Vario/Swiftech MCP655 Inline 12V DC Pump (with variable speed knob) + Detroit Thermo D5 Top + Bitspower 655 Mod Kit - $110 (all together)
EK Reservoir RES250 Rev. 2 Multi-Opton Reservoir + Anti-Cyclone + Case Holders - $45 (all together)
Alphacool Valve + 2 Bitspower Extension fittings + Bitspower Cover fitting + Bitspower Multi-way (3-way) fitting + Syringe + Silver KillCoils by iandh - $25 (all together)
Sunbeam PSU Modding Tool Kit + Some black heat shrink and cable sleeving + 4 120mm Black Fan Grills + 1 120mm Silver Fan Grill + 3 140mm Silver Fan Grills - $15
Swiftech Steel MCB-120 Radbox Rev. 1 Black - $15
HP Expresscard Analog TV Tuner Card - $15
Two D-Tek GFX UNI-Sink (8800Gt/GTS G92) - $25 (for both)
Two D-Tek FuZion GFX 2 GPU Water Blocks - $50 (for both)
Bitspower BlackFreezer Striker II Extreme 790i Chipset Water Block - $45
Here is my Woot! screaming monkeys collection. Well taken care of, they have never been played with, thrown/fly/scream.
Get the 3 giant monkeys (still in their plastic bags) for $50
or any 5 regular for $20
or get all 24 of them for $90
-
By Omega_Ace
If you have two boxes at the same volume and say one had a 2" slot port width and the other had a 3.5" port width tuned to the same frequency would there be a difference? Would the 3.5" port allow you to feel the lows better than the 2" port but sound the same since they are tuned the same?
-
By bassthrashin
I would like some input on building an enclosure for 2 ZCON 15D2's. The max cubes available for the box is 7(3.5 per sub) after displacements. I want to tune at 31hz. I have seen the recommendations SSA's site for enclosures but would like to have some outside information on how well these will do in 7 cubes . They will be running off a SAZ3500 at .5ohms. Thanks.
-
By 10rogerd
Hello all, I'm new to this forum, but not to car audio. I am however new to the Sundown woofers. I'm hoping you all can lend some help and thank you in advance on my enclosure design. What I have is an 05 Acura TL I'm doin a pair of Sundown SA12s in the trunk. Subs to be fired foward and a 6in Aero either out the back or side. I have tried several enclosures with foward fired subs & port, but the car just did not really like it. Last setup was a single CV Stroker12, power was supplied by an O.S. USamps VLX400 1ohm mono. I had good results with two 4in PVC ports fired back, Sub obviously foward. Then tried a 6in Aero out the drivers side of box. The Aero was slightly better. Anyway, my questions are... I have roughly 31in wide/26in deep and 13.5in tall to work with. I have an enclosure drawn up already with a net volume of 4.05 ft>3 and Torres is telling me with the 6in Aero @ 17in long this will yield me a tune of 29.64htz. Does this sound rite? I do want it to play very low!! I Only play music. Rap/Hip Hop/R&B/Funk/lil bit of rock/metal. My other concern is how will these subs like this size enclosure with the brutal power of the VLX? Amp is "rated" @ 2400 wrms @12.5v. Charging system is decent with a total of 4 large batteries and a 50farad Stinger Cap. All power/ground wire is 1/0 Monster Cable. Voltage playing it hard stays in the mid to high 13 volt range. Any input on if this will work fine would be great! Thanks again everyone.
-
-
Recent YouTube Posts
