82buick

i have some kenwood 6989ie 6x9's 4-way and the tweeters on the speakers burned. my question is why are the tweeters burning? i am runnning this speakers on a koiiler 2 ch amp actully i am running 4 6x9's to this amp.two 6x9's to one channel and the other two 6x9's to the other channel.the amp is 800 watts peak. the speakers are 280 peak power,rated power 70 watts.impedance 4ohms. i would really appreciate some info. thanks

cool! thanks alot everybody.

Is it ok to run the voice coils of the woofer to each channel on a 2 channel amp for a 2ohmx2 dvc woofer. I have my amp bridged. I have the woofer wired in parallel. but my amp is not 1 ohm stable, and a friend told me to do this. will there be any problems if i do this. please help

ya! its used plus performance don't like it.

performance teknic makes a 6-channel amp 2200 watts.a friend is selling one 120 bucks

i did the big 3.does the wire that connects from the battery to the alt. always has current running through it?

i have a duralast gold 1000ca 850cca 115 reserve its new about 1 1/2 months old. and a 90 amp alt want to get a second bat what should i get. any suggestions would be great!

ok try wiring them in paralle so that you are using all of your + - on your woofers

ckeck it out you said that you have a mono amp running the woofers

so your saying that you have 4 pos and 4 neg on the woofers i don't think you have them wired right becuse you have one pos one neg that are not connected

are your woofers double 4 ohms double 2 ohms

ok did bigger wire 0 gauge i have two rfg caps 1 fared each with my rfg power 800.2, orion h2 12", soundstream signal processor.plus 400 watt 4 channel amp running 4 6x9's rfg. jvc cd&tape hu and a eq..