Wow

Depends! Box design, electrical and the guy behind the volume knob! ....

X2 bingo

nice work

Old guys do nice work.Lol:popcorn: Looking good.

That's a big box or small car. Lol

Use your ears. They are the best tool you have in your arsenal.

x2

As for a sub the American Bass XD8 works good. Mid-bass..........I do not know.

so no1 guna help me?

16.5x13.5x18= 2.3 cu.ft before port; those are inside box numbers, Most 12's will work in that size box.

Ok guys, I was looking into a few stats on bench testing, and noticed that amps wired to ".5 ohms nominal" could see up to 1.5 ohms in reality. So, with that in mind, I read into box rise and all that good stuffs. I was just wondering, If I skip terminals on the box altogether and run wires through a small hole (that would be sealed up after of course) or out through a port would this help at all? Or would the longer length of wire just defeat the purpose? Thanks in advance, as always.

I did a lot of testing on this subject an gained like a .1 on the DMM by skipping the terminals. Box tuning is the only thing that really helped me cut down on box rise. If this is a street box only 1.5 is good. Good luck.

I need dimensions and..... Never mind just dimensions.

the box cant be wider dan 18 inches,it cant be more dan 15 inches high,dept cant be more dan 21 inches,im looing 2 go ported by d way

What is the inside dimensions of the your trunk?

Good start.

JUST FOR FUN 136.1 db at 38 hz.. lol

More

buy a good alarm as well.

[/quote x2

Nice work and welcome to the show.

looks good

Great number man, I know you are looking to do a 150 and it looks like you there.

:drink40:Give yourself a hand.

For that budget - Audiopipe

?

The answer was right there.

x2 on the Audiopipe.

:popcorn:I love it!!!!

jealous of your vehicle...

i wanted one so badly but i got too much snow where i go to school to get one.... one day

Best part is, It has 91,000 miles and I only paid $2k. I love ebay.

WOW!!!!

Thank you KU40, time to do some homework.

Hello family, I'm working on a design for my new SPL ( only ) enclosure. My last few enclosures had lots of impedance rise and I would like this one not to. Are there so thing I can do to help keep the rise down? A little more info for you. Box 1.8cuft, port 6" Precision Port tuned to 44hz., 3/4 birch x2 baffle. The sub is a Kicker solo X 10 D1 any help would be great. Wise guys need not reply I have no time to play.

Favorites were the punch 45 and 150 amps that were in my first system. Hard to beat that very first moment of WOW! I have much louder now, but hard to beat that first time. lol

If I could go back in time, it would be the soundstream reference amps that I wish I had kept. Kick my own ass now for giving those up.

I have two punch 150's one 45 and one 75 I don't play them, I just look at them and think back to the past when 150 watts was a lot. Damn I'm old. lol