Kent535
-
Content Count
474 -
Joined
-
Last visited
-
Days Won
2
Posts posted by Kent535
-
-
-
Went to a show this past weekend. heres some pics i took.
0 -
Update since last post: Filled in all the spaces and gaps with poly-fill and foam matting, sealed with aluminum tape, finished the support/false floor, started the enclosure, and built an enclosure for my mids and highs. Also got my american bass 350.4 amp which is going to need a hospital visit(in pics).
0 -
Update: Got started on the base/Support and am in the process of sound proofing the underside to cut down on as much road noise as i can on a budget. Also got some more goodies in the mail. Still waiting on my American Bass 350.4 however
0 -
Sweet tablesaw, congtrats!! I'd love to have a similar one. What model #? Also, what software are you using here?
Its a "Sawstop" Professional series.
The program was off of
0 -
Dont know if i calculated this correctly. Using multiple subs and a bigger enclosure is making everything hard to calculate. This is everything i plugged into the calculater. Trying to stick to around 20 sq inches per Cubic feet so in total i would have 160sq inches for 12 subs in a 9 cubic feet box.
Port is 28 tall, 6 inches wide, and 35 inches long for a 32 hz tuning. At least that is what the calculator tells me.
Any input? sound about right?
1 -
Bought some new toys to make the whole process easier!
New table saw, router, and Jasper tool for making perfect circles(Not shown)
0 -
The calm before the storm.
You know your a basshead when.....
0 -
3/4 inch birch for the false floor/foundation
0 -
-
Old box is out and getting ready for the wall build
0 -
About to order my mids and highs and am planning on running a 5K High pass filter crossover with them. The website specifies that they can handle 250 watts RMS and are rated at 8ohm. I am planning on getting 4 selenium 8ohm tweeters and running them in parallel to have a final ohm load of 2. My question is, do i only need 1 crossover which would be wired right at the exit of the amplifier channel before it goes into the 4 selenium tweeters or do i need to wire a 5K high pass crossover to EACH tweeter and THEN wire them in parallel?
Hope that made sense.
0 -
Amp rack will be killer once done
yessirr! so eager to get the funding for the other 2 3500's, then i can start on the extension of the amp rack to accommodate my mids and highs amp
0 -
-
Update: UPS delivered me my other 6 subs that i ordered. I also picked up an XS battery, as well as made an amp rack in preperation for my other 3 amps i will be getting soon. Enjoy
2 -
-
Update: Just placed my order for another 6 SA-8 V2's. Should get here around friday
0 -
Not trying to turn this into a poll or a design thread, just looking for input before i start to build the false floor and design/plan further.
0 -
Or theres my 2nd design. What do you guys think? Any input?
I prefer this look.
Just out of curiosity, why all the 8's? I'm not trying to bag on your setup, just wondering why not use a larger driver and less of them.
dont know how the numbers are going to look with the port covered mostly by the seat but can give it a go if i decide to go this route. As far as why... well i had 6 already so might as well get 6 more. Plus havnt seen a wall done with 8's before. Would be pretty unique and one of a kind. Again, don't know how the numbers will stack up tho...
0 -
What size subs? Also what brand?
Sundown SA-8 V2's
0 -
Or theres my 2nd design. What do you guys think? Any input?
0 -
Upcoming design im thinking about giving a shot.
not to scale or anything, just a rough estimate of what im thinking.
1 -
Attended my first bass race last week and ended up scoring this on completely stock electrical.
1 -
Last Teasers before the official video demo.
1
Kents 08 Lexus ES350 Build
in Build Logs
Posted
Back to the updates on the build:
Bought a tablet to use as an in-dash audio control but ended up changing my mind and going with a 1st Gen Ipad
More Goodies
Port done and coated with resin
Test fit
Router jig really helped out alot with the holes
3 inch thick baffle