Kent535
-
Content Count
474 -
Joined
-
Last visited
-
Days Won
2
Posts posted by Kent535
-
-
And 2 More Vids. With Our T3KW Design, Most Likely This Is How Im GOnna Be Running Most Of The Time
Then At Meets And Shows Ill Have The Screen With The HU Playing Some Music Videos.
0 -
bump
0 -
Heres A Pic And Video Of How BEAST This BTL Is at 1 ohm
0 -
Bad News Guys
I Had Everything Installed And I Was Playing The BTL
However Since Ive Been Running It Off A 300 Watt Plate Amp Its Been Wired To 4 ohm
But I Thought Id Wire It To 1 ohm today,,,,,,
All The Pieces That Were Holding The Screen In Place Came Off.
Just To Clarify Any comments about the screen rattling it did rattle like CRAZZYYY and
made a terrible lot of noise
But once i put the plexi over it nooooo more rattle
0 -
Bump
0 -
TODAYS WORK!!
Cut a piece of mdf so that the connections could fit it once under the screen
DVI,VGA & Power Cable All Fitted Correctly
Side View With The Screen In
Bracing And Border All Glued Up
Screen off without the plexiglass on
Screen On With No Plexiglass
Playing Some Young Jeezy With The Plexiglass On
0 -
Im Trying To Work With What I Currently Have, So I Came Up With The Best Solution For Now Untill I Have The Chance To Get Wome More MDF
0 -
Will Take A look At This Later:)
0 -
Well I Cut A Piece Of MDF yesterday that covers almost half on the screen so it would hold it in place.
I Would Order Some More 1" plexiglass but prices have gone up for them
0 -
I Cant Even Imagine Being In A Car Or SUV listening To 10kHz at 140db.Try listening to a 10 kHz tone play at 140 db and you will die.
0 -
Well Origionaly There Was A piece Of Plexiglass That Was Screwed Into the box. Mounted Flush With It.
Once I Get The Screen Back In Im Going To Put The Plexiglass Back On.
What Were You Saying About The Preassure On The Internals Affecting The Screen?
0 -
UPDATE ! - Ok so i Finally got some time to work on the screen install
Glue Is Drying Right Now And Should Be Finished Up Hopefully Tomorrow Or Friday!
Bracing And Screen Border Is Half Done.
Heres Some Pics;)
Screen Up? Lol Wouldnt Last 10 Seconds With That BTL
MDF For The Bracing And Border For The Screen,
Making Measurements
Test Fitting To Make Surre Everything Will Fit Just Right
Glueing Bracing And Border In
Inputs On The 22" Screen
Perfect Fit On The Left Side
Perfect Fit On The Right Side
Final Progress At The End Of Today
Both Borders Up So The Screen Wont Move Left And Right
0 -
Double Check Connections Especially Ground.
Or Might Be The Terminals On The Sub
0 -
Welcome To SSA Forum:)
0 -
Welcome
This Is A GREAT site!!
Youll Enjoy
0 -
If I Remember Right, If You Get Dual 1ohm Then You Can Wire It Down To .5 Ohms
And If You Get Dual 2 Ohm You Can Either Wire It To 1 Ohm Or 4 Ohms.
0 -
Itll Be Hooked Up To The DVD Headunit Mostly For Music VideosCool, whats your video source gonna be? DVD Headunit, game console, mini cams ???0 -
x2thats going to look sweet when installed!!!
thanx lol FI Subs Are Beastly so ill keep my fingers crossed that it doesntlooks nice. hope that sub doesn't wreck that screen to bad lol0 -
Good Luck !
0 -
MODERATOR Can You Change The Topic Title To "Screen Install In Box"
Thank You!
0 -
UPDATE:
Here Are A Couple Of Pics.
All The Bracing And Support Has Been Cut And Im About To Put In The Screen.
Idea Of What Its GOnna Be
What A BEAST !!
Couple Pics Of The Box B4 Screen Goes In.
0 -
Yeah, I Can Already Picture All The Screws Falling Out And The Screen Falling Apart lolThe Screen Is Probably Going To Be Absolutely Obliterated0 -
Its Almost Been 5 Days.
And Idea Who Won?
0 -
Thanx, Me And My Brother made It
I Came Up With The Idea Of Pkexiglass.
It'll Be Going In "89 Ford Mustang 5.0
Going To Rip Out The Back Seat And Make Another Custom Box for the 2 15"s
No Dont Have Any Scetches
But Pics Will Be Up Soon
0
Is This A Rip-Off?
in US AMPS
Posted
I Think Hes Asking If The Brand Is Good.
In Other Words
1. Is This An Efficient Amp
2. Does It Actually Put Out 4000 Watts