bdogg81
-
Content Count
44 -
Joined
-
Last visited
Posts posted by bdogg81
-
-
-
ok still waiting lol
0 -
hopefully buy one get one
0 -
Not sure what those are. We recone about 25 random subs a week, so they could have passed through here at one point. Or they could have been kits sent out based off of a customers dimensions... or they could have ordered any Fi kit and hoped that they would fit. Hard to say.
Look like double or triple stack of 190mm magnets... similar to old HC or maybe old Concept PT motor.
Possibly 1kW per sub RMS.
Thanks,
Scott
Thanks guys, i'm going to go ahead and build the box@ 32 htz 12^3 and throw this audiopipe 30001 on them for now and i'll keep you guys updated
0 -
well since it's not a btl i was wondering about the ported box specs so i build/ tune it right. i'm working with a 97 expedition and i have up to 40''s of length and 46'' of wiidth to work with and i want to tune it low if someone could come up with the measurements for the cuts that would be cool or i could paypal some cash.
40''length,46'' of width and 24'' of highth is the size of the trunk lol obviousley not going to use all of that i'm just trying to find out what size my cuts need to be along with the port size
0 -
yeah the seller no longer owns the shop and they were his personal subs, and i have decided i would like to keep them. the recones still have not fully broke in and the coils all metered out and i believe i can still get some decent numbers out of them.
0 -
well since it's not a btl i was wondering about the ported box specs so i build/ tune it right. i'm working with a 97 expedition and i have up to 40''s of length and 46'' of wiidth to work with and i want to tune it low if someone could come up with the measurements for the cuts that would be cool or i could paypal some cash.
0 -
the magnets about 4 inches in length by 8 inches wide, the guy i got them from had a crossfire 4k on them, i currently am looking at a audiopipe 3k. hopefully that will work
0 -
Looks a like a DC motor.
definitely i think it resembles a level 2
More than a level 2 but yeah not Fi.
im just wondering if they are an re he magnet with a fi cone what power should i run?
0 -
ok guys i bought 2 18'' btl dual 2 ohm subs from a guy that owns a shop near where i'm from, and i was told they were btl's fully loaded built back in 2007-2008 but i am not familiar with the magnets. ii was thinking somebody might know if they were older btl double stack motors? i have emailed fi but i have no number to contact them at. my main concern is what power i should be running to them if there not btl's i will include both links for the pics. thanks http://img822.imageshack.us/gal.php?g=imag0120d.jpg http://img337.imageshack.us/gal.php?g=imag0130o.jpg
0 -
will a audiopipe 3000d see 1ohm as a daily driver?
0 -
i rec\ently seen a pic of a pioneer hear unit with a batt. voltage readout on the display, does anyone know what models these are?
0 -
just wondering if anyone has had experience with audioque mids and highs along with there 4 channel amp
0 -
i'm curious about a 2600 on a 18'' btl fully loaded dual 2ohm sub, do you guys think it's a decent amp or should i pick up something a little better?
0 -
i will be putting a system in my wifes chrysler 300 and i was leaning towards audioque sdc 2.5 and a audioque 1200d, i will be using 2 subs in a ported enclosure, my question is how do audioque's hold up against say ssa or incriminator 187's
0 -
guys i have a 97 expedition and i am running a 18'' btl fully loaded dual 2ohm with about 2.5k to 3k watts on, and i was wondering what you guys though as far as the specs on a box would be/
0 -
i have a 97 expedition and i have a 18'' btl fully loaded dual 2ohm that i will be running between 2.5k to 3k on,and i was wondering what kind of electrical upgrade you guys would recommend?
0 -
i just picked up a 18'' fully loaded dual 2 ohm btl for my expedition and i was wondering what would be a good amp for daily driving? my budget falls between $300 and $450
0 -
i would like to stay between 300 and 600 dollars
0 -
i was thinking of running two audioque 1200d at a 20hm load, do you guys think thats to much power for a daily driver or would it make more sense to do one kicker 1500.1 or a rockford power 1500.1?
0 -
well what is the RMS power rating of the amp?
Kicker makes quality amps that do power at 2 ohms
sorry guys i forgot to add the subs 1200 rms
0 -
i was wondering what amp would be good to run my 15'' old school stroker with,it's a dual 4 ohm so i need suggestions for a 2 ohm load .
0 -
i'm lookin at buying a 15'' old school stroker for $100, but the dual 4 ohm coils are metering 3 ohm do you guys think it has much playing life or should i not buy it.
0 -
my friend has an oldschool 15'' stroker dual 4 ohm for $100 dollars, my question is that it reads 3 ohms on both coils, does it have much time left in it or should i not buy it. thanks for any info
0
Incriminator Audio Dream System Giveaway Contest!!
in Incriminator Audio
Posted
im putting my faith in this contest, it's been a horrible year in car audio for me, my ia 20.1 fried within 10 mins of me owning it yesterday, good luck everyone!