mariobjones

Those are definitely on my list as well. They sound pretty good.

I agree with this, in terms of your goal being a balanced system, or one that gets really loud but does not have much audible distortion. Ok. So, I'll take out the Kenwood 5-ways 500watts. So no speakers for the rear deck?? My car didn't have factory back door speakers. So you all suggest I install 2 or 3 speakers in each door (I'll fiberglass them for customs), with no rear deck speakers? Is that what you guys suggest?? AND NO SUPERTWEETER??

Thats a nice looking battery!!

Just upgraded my headunit now have the Pioneer DEH-P610BT it looks great, and I've always loved pioneer headunit. Anyone have this headunit? Opinions on the microphone and bluetooth? http://www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-P610BT Can someone tell me which frequency I should have for my subs on the radio??? I was always told 80hz is good.

I forgot to post the IMPOSSIBLE. Was really easy to fit. Have and amp rack now, and putting batteries on sides. What do you guys think? 3.2cbft each box. Waiting on hd cam to ship, so I can do a video of the flex.

Nah no thanks!! I blew a couple of those on same power I gave my ken woods.

I can fit about 10 6.5s on their. Lol might have to try that. Which 6.5would you purchase? And would you do different types? (same brands, just mixing them with 3-ways and components)

I already have amp on the way. Crescendo 1k I was looking into the cadence speakers they have nice 6.5s and 6x9s. Hear anything good about them?

I have 800PRS and my girl has the 880PRS..... Oh.

I would like to be the first with an 18 in the trunk. In that case I'd get the FI btl n3!

I may be looking into finding one of these head units!!

I used to have a 12 2nd gen btl and I gotta say that these icons sound better and get louder. But of course it was just 1 btl.

By yeah. Any premier pioneer radios are a good choice. In my opinion, and kenwood and alpine make decent radio also!!

He'll yeah!! Why you decide to go with the FI BL?

If Meade uses it, it must suck donkey dick.... Fixored I don't nut hug, I don't believe just because so and so uses it therefore it must be good, but some of the products he uses are good Exactly!! And I personally haven't found any issues with pioneer head units!! Now if Steve Meade used JENSEN Headunits, we'd have a problem!!

He'll yes!!! I'll try do A video today!! Ordering a new hd camera on Monday, because I misplayed my old one.

If Meade uses it, it must suck donkey dick.... Fixored Lmaoo

If Meade uses it, it must be good right... The 710 only uses more eq's!! Which is better!!!

Not yet!! Been pretty busy. I have to find a bass spot. I need a better amp also, but it's pretty darn loud now.

I wish you posted this yesterday. This guy had two pioneer radios. I got the deh-p610bt for 80 bucks brand new. He sold the other today the deh-p710bt (same one Steve meade has)

damm those 1st gens? yea im thinking something like that im starting the build this weekend supposed to be nice out 50-60s lol. Bro I'm from the south, that's borderline freezing for me lol... It's mid 70s low 80s here in Houston. With a light wind. This is nice lol. But yeah these SSA icons first gens!!

well fi recommends 3-5 cubs i want at least 3.5 cubes just for a lil wiggle room for displacement and bracing and stuff. that would be great bro! whats the biggest box do you think i could fit through the trunk? what year is yours? I have the 2002 40th anniversary one. And I'm not sure how big of an single box you could fit, because mines are in different boxes as shown. It would be pretty difficult. But a rough estimate I'd do 3.5 ported because I know how tough it would be to stuff it in their. I wouldn't go bigger than that unless you build in trunk.

FI BL specs Fs: 33.6 Hz | 33.6 Hz Re: 0.7 Ohms/coil | 1.4 Ohms/coil Qms: 5.21 | 5.21 Qes: .28 | .28 Qts: .27 | .27 Mms: 261g | 261g Cms: 0.86mm/N | 0.86mm/N Sd: 810cm^2 | 810cm^2 Vas: 78.9 l | 78.9 l Spl: 91.8dB 1W/1m | 91.8dB 1W/1m Bl: 16.6 N/A | 22.7 N/A Xmax: 18mm | 18mm Rms: 1000W * | 1000W * Sealed box: N/A cuft | N/A cuft Ported box: 3-5cuft | 3-5cuft Sub OD: 15.625” | 15.625” Cut ID: 14.125” | 14.125” Mounting depth: 8.250” * | 8.250” * Displacement: 0.21cuft * | 0.21cuft * You can do about 4cuft in the trunk ported!! My advice to you is not to make the box so tall.

People said it was impossible!! I can even fit them ported in correct sized boxes!! It just takes patience and dedicated.

That is what this site is about. Ive learned a lot about sound systems in all aspects!! Continuing to learn!