unpredictableacts
-
Content Count
58 -
Joined
-
Last visited
Posts posted by unpredictableacts
-
-
and to continue......Next step .....vinyl....
Can you tell me how you attached that top panel the were able to push it down and keep it in place without the use of fasteners from the outside? Thanks so very Much. Z
0 -
Please tell me that basket is just black and textured and not black with white speckels like the pictures shows.
0 -
Hey, great job. I'm sure a lot of work went into designing that. Is wrapping a box with vinyl and harder than with carpet? Haven't seen any vinyl tutorials..Vinyl is harder than carpet hands down.....carpet can hide its own seems and with vinyl that does not work.....plus heat and a slow wrap has to be used to make a finished product look good. Good vinyl is also important.
0 -
FSC:http://www.fullsizechevy.com/forums/genera...eo-electronics/
Of course you'd have to sell in the classified section, but there are a ton of build lazy people on that site...
Nice if you are a member on there would you mind linking this build to stir up interest......I will join this evening after work...and set up a for sale ad.
0 -
BTW. You should sell those on FSC.Not sure what FSC is but of you want to link this thread there that would be great.
I am willing to do these for others...I have 2 going out of state in the next couple of weeks but due to weight shipping can be pricey and out of my controll as far as cost.
I would actually like to get some threads on Chevy,Dodge,and Ford truck forums.
0 -
Any chance you would be willing to shoot a rough copy of the box plans for the F-150? Also, is there any way to make the top piece of the console level?Great job BTW! I haven't seen one done this way yet.
The top can be made level if you ...
A) the rear has to have 2.75" of clearence in order to flip up......so you can raise the front up 2.75" as well....making it uncomfortable.
B) You can just level the top on top of the enclosure......but then it will not flip up.
0 -
Great work. I love seeing the Ford/Chevy comparison too. The stupid armrest on the Chevy isn't as nice as your box.
....Thanks guys I have another chevy console coming up this next week so i will get picks of it as well.
it should look somewhat similiar to the tan one....I just love the idea of utalizing unused space and keepin it stealth.....who would thing to steal the center console?
0 -
GREAT!!! Do you like having the bass up-front in the console? Having the sub in that location can really open up some headroom for you. I really like how you took the time to make everything blend with the interior.It is not my truck i have done several consoles for locals and a few in other states......the ones i have heard local sound great and if I could in my car would love to have upfront bass like that....IMHO makes things blend a little better.
A couple I did a few weeks ago for Silverados...the Black on is comfortaBLE YET STILL ABLE TO HOUSE An ID max with ease.
installed......
and the other
and installed
0 -
what was the center console like before?Similiar top but not as LOUD.
0 -
very good work! Very good.Thanks wrapped this up Tuesday and since it was a Fi woofer I figured this would be a great place to post it.
0 -
and installed.......it is black but the sunlight crews up the pics...
I already told him that he needs to vacuum and that his dirty truck makes my console look dirty.
0 -
and to continue......
Next step .....vinyl....
top attatched
0 -
Ok the project is to remian stealth but get loud!
These trucks suck for under the seat room so the best bet is to go the the console with the enclosure....so i did......It is fairly easy to get 1.5 cubes and still remain at a resonable height and does remian comfortable.
I did not take alot of early pics....I had bateries charging and could not slow down so I started taking picks about half way through......sorry.
objective:
Keep stock arm covers
keep stock top arm/storage area.
Woofer being used is a Fi 12" SSD
the rest of the system is still uninstalled...I dont have the time to run wires and install the HU so a local shop willl cover this fun activity.
So I drew out a working sketch....made my cut sheet, made the cuts and started peicing together......and that gets us here.
test fit woofer and check clearence....we have 3" of clearence so I think we are good.
0 -
I was leaning towards a eD 13ov.3 but with the power I have on tap DLS A3 1200 watts at 1 ohm I am going for the big boy. So if you have a used one in good mechincal and cosmetic shape please let me know. I may have a TREO SSX 750.1 (does 1500watts at 1 ohm) for trade if you want to add a few bucks to the swap.I realized that I do have enough post to post the the forsale section so if there is a need mods please delete this.
PM SENT
returned thanks guys.
0 -
I was leaning towards a eD 13ov.3 but with the power I have on tap DLS A3 1200 watts at 1 ohm I am going for the big boy. So if you have a used one in good mechincal and cosmetic shape please let me know. I may have a TREO SSX 750.1 (does 1500watts at 1 ohm) for trade if you want to add a few bucks to the swap.
I realized that I do have enough post to post the the forsale section so if there is a need mods please delete this.
0 -
Hey scott.
I am Using the hybrid SX woofer in a friends dodge quad truck console.....reatatching the factory console top back to it. I am not sure if i can squezze the needed area out to get enough air space for a ported enclosure. I will be using a eD nine.1 for the power to the woofer...the woofer is D2 and a 12"....Will the woofer perfrom well in a sealed enclsore? also what kind cubic footage do I need? Also do you happen to know off hand the displacement of the woofer? thanks carl
0 -
I want to do a slot portwhat sq inch opening and depth do i need?
if I went 4" round port
what length would I need to achieve the 32hz ?
also how much cubic ft do i need grosslywhich would already figureboth woofer displacements and port displacements....thanks guys.
specs for the AA assassian
http://web.archive.org/web/20060502060130/...sin12specs.html
MAINLY just the port length and sq" opening.
0 -
I want to do a slot port
what sq inch opening and depth do i need?
if I went 4" round port
what length would I need to achieve the 32hz ?
also how much cubic ft do i need grosslywhich would already figureboth woofer displacements and port displacements....thanks guys.
specs for the AA assassian
http://web.archive.org/web/20060502060130/...sin12specs.html
0 -
So I should pick them up for the wifey?
0 -
Bear Mountain Audio. Wasn't this a Canadian company? IIRC, they were of good quality.what is IIRC?
0 -
Never heard of them before. The top piece is a nice touch, but what is the seller asking for them?Depending on the price, I would look at the RF 25 To Life amps at the SSA store instead.
$70 for the pair shipped
0 -
Are they simi quality amplifiers....maybe for the wifes car? I may have a good beed on the set.
here is all I can find on the BMA amplifiers
http://ampguts.realmofexcursion.com/BMA_29e/
or can any of the board experts tell me if the board is decent?or is it just trash?
0 -
Two words.Heat dissipation.
You took the words right out of my mouth.
meaning that is the reason for such a large unused area of unused shell? or he will have a problem with heat with those plexi covers?
if the first one is the case why are there som emany amplifiers that can avoid heat problems and dont have to allow such a large area of unsed heatsink? I like the specs of the amplifier and it is tough to beat the US amps name but I am pressed for space, yet a crossfire BMF 1000d fits the bill fine.
0 -
I have seen a plaxi back made for the MD1D.....my only question is.....why does the board look so small in the case? If the board is indeed smaller than the case itself ,why not make a overall smaller amplifier? I guess most amplifier producing companies have the mind set that customers think that bigger is better, if that was the case the new Alpine PDX amplifier would not be doing so well.....I would love for the big amplfier trend to slow a bit and offer compact powerful amplifiers for easy mounting and stealth installs....isnt this one benefit of the class D amplifiers....smalll footprints?
pics here...
http://www.caraudio.com/forum/showthread.p...;highlight=MD1D
0
Fi-Ford Console/Enclosure...STEALTH
in Build Logs
Posted
Thanks Guys for all the replies.....I also do these for GMC/Chevys.....this allows the truck guys to have a nice stealthy setup, but allows room under the rear set for storage....as if the bed was not enough.