holykaos
-
Content Count
69 -
Joined
-
Last visited
Posts posted by holykaos
-
-
I can Bring the depth out about 2 more inches. Can't go higher or wider.
0 -
The box is the size it will be around 3.5ft3 and after bracing and such around 3.2-3.0. I know i want to do a square port and i want it to hit as low as i can with 4 8's(trying to break stuff in my car).
0 -
So made a design for 4 Sundown audio sa-8 Dual4. I need to figure out the port tuning for the box. Here's a work up of it i made.
Its all 3/4 mdf with a double top plate to flush mount the subs.
Box size is 39w 12d 16h(16 3/4 with top plate) The port size i was thinking was 6h 8w 7 1/4d
0 -
So i ordered 2 more sa-8s and 1 more hifonics 1200.1 there on the way now i just have to get the stuff to do a re build.
0 -
Well what i really should find out it will my amp be stable at the lower ohm loads. I have the calc. stuff for ohms just kind of lazy on figuring it out after doing the math for my box.
0 -
New box for 3 8s
What would the ohm load be for 3 sets of 4 ohm vc's
0 -
Think i am going to re build my box, Not hitting as hard as i would like, sounds really good for SQ but i want a little more i might rebuild and add 2 more 8's
0 -
so every thing is in and installed(besides my batt set up) system sounds really good and clean. I have some picks and a videos on my phone but not able to put them up here till next fri.
0 -
Lol ya as soon as i get the project started and working i will post some more pics. This part is going to take awhile because the plexi is getting hand etched and acid washed while i do it so it will take about 6 days to finish it.
0 -
The logo is going to take some time, i am hand etching it into the plexi and still have to cut the hole in the bottom panel put my batt's down there and wire them up. The pexi will cover them and use some back lighting to light up the logo plus the batt's.
0 -
Ya hifonics brutus 1200.1 And a few other little things like some wire gauge connections for a cleaner look into the amp. My plexi for a custom sundown audio back light on the floor of the hatch and my lights.
0 -
I keep checking the tracking on it over and over hoping it says ahead or that its here.
0 -
I used the re audio box builder then double checked what they said with the formulas from my mecp book.
0 -
Shipping says thurs or fri. and everything is already wired up just have to drop the amp in.
0 -
I thought they were going to be small but those little things are huge i would say double the size of my old dd 1500 8's. Now lets how they put the sound out.
0 -
So after waiting a few days my subs are here and i took the time to install them tonight. Now just waiting on my amp(should be here Thur).
0 -
Subs and amp both ordered and on there way.
0 -
I don't believe it 0 gauge because i have ran 0 gauge and because of my wire size chart for true wire size. The wire inside showed 2 gauge and i put it beside my stinger 0 gauge and it was a little smaller.
0 -
Oh ya i did do that just did not take any pic's my phone has pandora on it so it was hooked up to my radio in my garage for music. But ya i did a flat edge corner molding because its so small and liquid nails plus a few brads later the were in. Oh and for the people who said the port looks kind of funny in orange i can understand that but once the car is repainted to orange and black it will match.
0 -
sweet 90 bucks each saves me a little money then.
0 -
So after putting next to my stinger wire i have now it looks more like 1 or 2 gauge wire but still better then the 4 gauge i have now.
0 -
Are the reconed version's any different from the normal ones or have any flaws that you know of.
0 -
So my 1 of my wire kits got here today(ordered 3 to be safe) Its the e2 E3200 by Scosche i don't think its true 0 gauge but thats fine this system is not pushing to much.
Here's the link if any one want to look at it http://www.sonicelectronix.com/item_7280_e2-E3200-by-Scosche.html
0 -
Wow so fri i was going to buy 2 of the sundown audio sa-8's off here, and now they don't have the listed any more whats going on.
0
Tuning a box
in Sundown Audio
Posted
Like i said i want it to be loud and low. I want to see what i can break in my car. Its going into a hatchback look up my old build log