Jump to content

SKEEMASK

Members
  • Content Count

    179
  • Joined

  • Last visited

Everything posted by SKEEMASK

  1. getting the T4004 next for the tweets and 6.5 mids. Still saving up for the big AT-7K monster. I plan to on some 2 sub setups with this blowthrough + sq is just as much of importance to me as loudness
  2. actually PWK stands for Pete W. Kulicki and so far as the fronts I will have somewhere around 1300rms.
  3. also my PWK design is almost finished. Double stacked and horizontally screwless
  4. SKEEMASK

    SAZ-3000D POWER TESTING

    So say I wanted to run 2 of these really bad but I had 2 dual 1ohm subs meaning I wanted to strap them @ 1ohm daily (music). Could it be done with a 250amp alt, a Deka Intimidator 9A78DT up front, 3-Deka Intimidator 9A31s near the amps and 2 runs of 2/0? Plus with that much current draw...would the 300amp anl support that 392 amp draw ur showing?
  5. SKEEMASK

    2-dual 1ohm BTL 12s....2500+rms or 3500+rms

    so little but so much said, lol. Think the extra $700 will probably pay off in the end.....might as well go with the 7K.
  6. Got 2-12" BTLs the old versions. Im trying to make up my mind on what to power them with between a AT-5000.1D or the AT-7000.1D. Its only going to be a daily blowthrough in a '97 Thunderbird. Which do u think I aught to go with? If I went with the 5K Id be saving needed space due to less batteries. If I went with the 7K its a $400 difference in price and Id have to get an extra rear battery on top of the ones I already plan to run.
  7. well let me ask you, what is so wrong with Iraggi and Reman? Everybody on here has said they are chit but cant give me a reason why or either they've never used them personally. I know this site is affiliated with Powermaster but that doesnt mean that Powermaster, Ohio, Mean Green are the only people who can make a good alt.
  8. now PowerMaster XS batteries are a different story. I do think they have the best batteries.
  9. 2 of the guys I know with Remans got ride of powermaster alts for the Reman and the other got an Iraggi. 1 of the guys with the Reman alt (300amp); he ran a lil less amount of power Im going to be running with 4 of the same batteries Im running and without a voltage regulator his voltage stayed around 14.9 and rested @ 14.3v at full tilt. Id get an Iraggi before I run a Mean Green or Ohio. Lol, I forgot this was a bias forum. Cuz if I asked the same question on a Bosch or autozone site, they would say the same thing about Bosch and Autozone. Im not paying $500+ for a alt when Iraggi and Reman sells them for my car for around $350-$400 shipped.
  10. Other than that craptastic alternator you picked out.. I'd add one more battery. Ive thought about a dual alt setup but I cant find a dual bracket for my car. And so far as the Reman alt...I know of 3 people who have had nothing but success and good things to say about them. Ive heard several negative things about EA, I cant get a answer from Ohio plus I think the are on dope with some of the prices Ive seen.
  11. Im getting my stuff together to start on my install. Plan on a 250amp RemanMotorCity alternator. Ordering a Atomic AT-7000.1D and a few Clarion amps for my highs. Thinking of going with a Missing Link regulator, 1-Deka Intimidator 9A31 under the hood and 3-in the rear less than 1 foot from my big amp. So thats 4 batteries and Im using 4/0 welding cable for 2 runs to the rear. do u guys think I'll be ok? this is a daily
  12. SKEEMASK

    The Best subwoofer

    id say 1 BTL 15 and a zx2500.1
  13. SKEEMASK

    The Best subwoofer

    way too much money....but nice if u have $1400 to spend per woofer
  14. SKEEMASK

    THUNDERBIRID SETUP

    Got a party pack in the mail today 2-Loaded Fi BTL12s (dual 1ohm) 4-Mach5 MLI-65s (6.5" midbass woofer) 4-Dayton 4" full range speakers (midrange/front bandpass) 4-Kenwood 0.75" Silk Dome tweets (front high) lol, bare with my ashy ass hands....I just got off of work, so dont trip. Soon to come: Rockford T40001BD, (2) T4004's, a 230amp dB Starter alternator, (1)Deka Intimidator 9A78DT deep cycle under the hood and (2)Deka Intimidator 9A31's in the rear.
  15. SKEEMASK

    THUNDERBIRID SETUP

    I have a photobucket account...I was so tired and excited at the same time, I wasnt thinking
  16. SKEEMASK

    ia 40.1 ever again?

    where?
  17. SKEEMASK

    MLI-65 users

    I just bought 4 of them today. Glassing them in the bottom of the doors in my Thunderbird. Using 2 in each door as a dedicated midbass from 80Hz-350Hz with about 80watts rms. Using 2 sets of these 4" comps for front bandpass and front high. 1 set in the factory opening and the other set glassed in the A-Pillars. http://www.crutchfield.com/S-NS8VHw4tHDH/A...X1414&g=410
  18. SKEEMASK

    so like whats the problem with ireggi?

    Im thinking of going with these guys. The guy I bought my BTLs from had a 300 amp and he was very pleased. Said his voltage stay up around 14.3 @ full tilt. http://www.motorcityreman.com/ I want that 250 amp for my Thunderbird
  19. SKEEMASK

    E8 Pre-Order / Intro Sale

    I dont know this might just be what Im looking for after all if u say Im good up to 200Hz....possibly would need a stronger midrange. Would I get the 8 with the plain cone or with the logo? Im looking for a midbass to keep up with 2-BTL 12s. Im trying to do a active 3way with 1 pair of tweets and a 3-4" midrange in the A-pillars, another pair of tweets and a 3-4" mid in the factory door location, and 1 pair of 8s @ the bottom of the door. (2dr vehicle) With a rating of 200rms this might just be it and the price is really whats making me want to go with these. How much longer is the pre sale?
  20. SKEEMASK

    E8 Pre-Order / Intro Sale

    like em but I was looking for something more thats good from 70Hz- 300Hz in a 7 or 8" that can handle around 150-200rms. I know you are trying to sell your product but do u have any suggestions?
  21. SKEEMASK

    E8 Pre-Order / Intro Sale

    Im looking for a nice plain looking mid bass to run in a active 3way. Do u think this would be good from 70Hz-250Hz maybe even 300Hz? And is the pre order still open, if so how should I go about ordering 2?
  22. SKEEMASK

    merlin md3d

    anyone know how I can contact flak about one of the new merlins? pm him.
  23. SKEEMASK

    merlin md3d

    How did I know he was talking about Ikesound too. Lol. I purchased 2 L7-12s back in 03' but I didnt have anyproblems with the subs so I dont really know how their service is first hand. It was a simply ebay buy. I see where alot of people who have had problems with them selling refurbs at new prices, cant get them to hold up warranties, product not really in stock etc.
  24. Thinking of getting 2 sets of Diamond Audio's s600s (6.5" comp with the silk tweet). How is the mid bass and how well does this set take that 170rms rating? Looking to keep up with 2-BTL12s. One set in the doors and the other in the kicks. Both pairs of woofers would be sealed in its own glassed enclosure just big enough to fit the woofer.
  25. SKEEMASK

    Diamond Audio HEX-s600s

    POLK MOMO?
×