Jump to content

Nextiii

Members
 View Profile  See their activity

  • Content Count

    87

  • Joined

  • Last visited

Posts posted by Nextiii

  1. Posted · Edited by Nextiii

    Connected to a bolt in the trunk thats coming from the car frame, and during testing I've only had this amp in... my car has been apart for about a month waiting to get it back just in case i got to do this bs all over. it plays 2x bridged at 2 ohm on subs fine , but when i get to mess with the xover for highs it protects.

    0

  3. Posted

    man i checked everything iv'e spent 10 hour days checking everything. shorts? i rewired everything 3 times man taking all the seats out my car and everything. 2 4 ohm mids on one channel 1 ///// 2 4 ohm mids on channel 2 ////// 2 8 ohm tweets on 3... and if there is a special way of changing the gains or changing the xover without it going into protect let me know man cause this shit is nerve wrecking.

    0

  4. Posted

    Ok I would like a new amp or a refund for my c1100.4 The day i received it all it did was protect..even with JUST rca's in. I changed rca's and everything checked all speakers (4 crescendo 8's and 2 cendo super tweets). It plays for a little and randomly protects. I call you guys and you tell me I need another battery JUST to run this SINGLE amp. So i got the battery STILL protect. I switch from high pass to low pass...guess what? Protect. I send the amp to you guys and you say it's fine and send it back to me , but I had the same problems when I received it again. I SEND THE AMP AGAIN. you guys say the 3rd channel went out due to low power and tell me i MUST have a second battery WHICH I DID AND THE VOLTAGE NEVER DROPPED.To make you guys happy, i went and bought a D3100 and im still having the same problems! this thing goes into protect from just changing the gains and crossover settings with no speakers hooked up! the only thing this amp can do is play on LPF lows without protecting.

    No speakers pinched / no loose grounds / voltages are fine / 0 gauge everything / no speakers are blown

    In the process of all this thinking its maybe something i did wrong ive replaced the following

    Head unit 150$

    Rcas's 20$

    EQ 60$

    New montser cable 4 channel wiring

    Wal-mart ever start maxx 94R 130$

    shipping it back twice 50$

    XS D3100 360$

    supposed 3rd channel repair 40$

    All the other products i bought from you guys work fine! im not one to complain about anything and I always triple check shit. Yal makin me feel crazy for real I just want a working amp.

    0

  12. Posted

    OK long story short. I bought a crescendo c1100.4 everything runs fine when the car is off, I can turn it up loud as ever it sounds clean. When I start the car after a while the amp goes into protect. I sent it back to crescendo they tell me nothing is wrong. When I got the amp back I did step by step problem testing, I changed the RCA's hooked them up one by one, changed speaker wires, changed to soldered grounds and power tips, and I even changed my head unit. The same problem happens, I did a test to see how long it would play when the car is off and it STAYS on and plays loud and nice for a loooooong time. When I turn the car on same volume etc it goes into protect after a short period. I called back crescendo and I told them my problem the guy told me when the car is on the cars acessories might be using most of the power and sending it into protect. I didn't get this statement at all because I thought the car gets more power from the alternator when its on? any suggestions what might be wrong.

    0
×