Jump to content

ricksi30

SSA Regular
  • Content Count

    7,059
  • Joined

  • Last visited

  • Days Won

    46

Everything posted by ricksi30

  1. ricksi30

    A few Pics of the latest Mazda 6 build.

    For sure. The output difference vs the two sa12's is insane, off of the same power too. The trunk is sealed for the 15's and wasn't with the 12's. He broke his rear view off of the windshield and got pulled over the day we installed them.
  2. ricksi30

    stefanhinote's volvo v40 build

    Nice score How was the show?
  3. Post a screen shot, you probably missed something.
  4. Same here, never had an issue I just sand the edges to remove the sharp edge. Just make sure you have adequate port area ~50"
  5. It is fine, 45's help but aren't a necessity. Round the edges with some sand paper and you'll be fine.
  6. A standard slot port is not difficult.
  7. The discrepancy in port length is due to having different net volumes for each calc. Torres accounts for port, woofer, and extra baffle displacement the other does not. And you need a lot more port area.
  8. ricksi30

    12" SSD or 12" X ?

    And make sure you learn how to set your gain or you'll have another blown sub.
  9. ricksi30

    Mark Fukuda

    And now models wear a lot less clothing.
  10. ricksi30

    Component wiring question

    What are you going to use as a crossover? If you have a good crossover in your headunit you can do an active setup. It may just be a bettter option to get a comp set. What's your budget.
  11. ricksi30

    Help Come Up With A New XS Power Slogan

    Xs Power- Power that surpasses the rest. Xs Power-When you need some more. Xs Power- The only option. Xs Power- Not just enough power, Xs Power. Xs Power-When others fall short, get Xs. Xd Power-If you need excess power, get Xs Power.
  12. ricksi30

    4 10's Sundown Audio

    So I decided to pick up another Sa10 so I can wire down to one ohm. Now I just need to figure out how to fit these in my Infiniti I30. I've always done sub back, port back but can't with the four tens. I'm thinking about doing port and subs up, I've also thought about subs up port through the armrest. I'm capable of designing and building the box, just wanted to know if anyone had any advice about the layout. Thanks -Rick
  13. ricksi30

    Phoenix area GTG for a great cause.

    I will try to be there. Love your work, and great to see sombody giving back.
  14. ricksi30

    I know I have a car audio addiction when......

    Haha all of these are sooo true.
  15. ricksi30

    OPINIONS NEEDED!!!!

    Out of those I'd probably go with the Dcons. Nice comps BTW
  16. ricksi30

    MECA Finals Death Penalty Rebuild.

    Looks great
  17. ricksi30

    my first ever ported setup

    In my opinion I think you should go with two 18's. Slightly less cone area than 3 15's, but you can wire to one ohm and have plenty of room for a nice ported box. With the three subs depending on if you get dual 1 or 2 you will have to wire to 1.5 or 1.33, and with that amp most likely being over rated with imp rise you will probably only see ~500 a piece.
  18. ricksi30

    Anyone with sa-8s in a extra cab midsize to fullsize truck?

    Probably the box. If you can't figure out port area how can you be sure it came out right. Not trying to be a jerk, just trying to help.
  19. ricksi30

    stefanhinote's volvo v40 build

    Damn yeah 75 an hour for an inaccurate score, I'll pass. Excursion looks sick!
  20. ricksi30

    stefanhinote's volvo v40 build

    I'll keep everyone posted on my results and the other v40s results If I can get them I would love to make the volvo loud enough that people have to bail out. Obviously some people will take more then others, but you get the idea Okay I was just informed that one of the shops here in town has a TL. I actually contacted them a while back and they said they didn't have one, so they have gotten one recently. Contacted them about getting some metering time. I should be able to do more testing with Ken's meter since I won't be on any time crunch, and I'll compare his meter results to the TL. Whoa!!! Who has a TL in town?
  21. ricksi30

    comment on fi btl n3

    So you really think that you will have SQ with 4 subs made for burps???? Well I have not tested them and I will know soon enough if they can blend well with a decent front stage or can't. If I can't modify the enclosure build to make it happen or change front end I guess we know. I have not found a decently made subwoofer I could not make sound good, its all in the enclosure and application. If this is the first one that I can't make sound great with a front stage then it will be a first for me. I will also be testing out a MS-8 JBL processor later in the year to see if it improves on what I can already do. As for the 4 subs they really only see alot of power during open door demo's, and competition if I ever find a show that I don't have to officiate. Install is 90% of a good setup, but SQ is not at all what these drivers are made for.
  22. ricksi30

    comment on fi btl n3

    So you really think that you will have SQ with 4 subs made for burps????
  23. ricksi30

    Aero ports

    How to flare pvc http://www.subwoofer-builder.com/flares-25mm.htm
  24. ricksi30

    What is Significant About Box Tuning?

    I think that 34 is my favorite tuning for a daily setup because its the perfect amount of spl and sq. A higher freq is generally louder because cars usually peak higher than a daily box would be tuned. The reason a lower tuning sounds better is that a box tuned to ~38+ is going to roll off below tuning and you lose a lot of low end. Also playing far below tuning can cause your sub to unload.
  25. ricksi30

    Single Nightshade Hair trick

    Good stuff man.
×