Dexter Chaos

350+shipping

Ill trade ya an 18" xcon for 1 of them there amps(:Thanks but can't fit in my car.

Ready to get my sundown on. Any offers?

I have designed a box using Torres. Under port dimensions I have entered 33.5 as my length In the calculator it has a Physical Port length of 25. It also states that this will require me to make a bend but at 25 inches In my mind I was looking at it that I will make the two peices of wood a total of 33.5" long. 1. What is the difference? 2. Which should I use to make my cuts with? 3. Am I looking at that incorrectly? I am just confused now.

Maybe this will help me

This is how I understand it. But when using the calculator I would only have to make my second port length 1 inch long. when I change its actual lenght using torres it still states being a bend. Even if I change my measurement to keep those values correct. I hope I am saying this clear.

7 inches

Thanks Aaron can't wait

That is crazy loud. Can't wait to see what 2 can do for me

I am currently building my first enclosure. When it comes to building the double front baffle should I do choice 1 or 2. 1. Should I glue the two pieces together. Then router my hole for my speaker. 2. Router my two holes. Then glue my boards together. Thnaks I know this is a simple just trying to make it easier on myself.

I ordered a Zcon and have received a tracking number but when I check tracking it just tells me it was created but has not arrived to a ups deilivery site. Is this normal with a purchase from SSA? I just got excited since when I ordered it said 21 days + for delivery. Can I get this cleared up? Super pumped first SSA sub purchase.

This was my original plan This is why I stopped. I felt that is would give me a more symmetrical hole just wasn't sure if there was a better way to completethis part of the build.

This is the guys car I work for on the weekends at the race track. Just thought I would share.

Starting my box build All cut Port front of port. Board on left is not attached yet just using it for support

Pm sent just let me lnow

Port building and grey goose

Awesome

My port is going to be 7 inches wide by 11.5 inches tall so that will give me 16.89insquare of port area If I make my port 6.25 inches wide to bring my frequency down my port are changes to 14.09. I believe this should still be ok just wanted some opinions. Is there a direct better choice in this matter? I have chosen 2-12" Zcon D2 cresendo 4k power my concern is cabin gain in frequency that is why I am looking at lowering my box tuning.

Who can I talk/pay for some help with my enclosure/ deciding which sub would be best for my enclosure size. using SSA subs.

If I went sealed 5cuft is the largest enclosure I can build. I have been looking at building a ported enclsore and I have been able to make the box large just in two peices to finish assembly in trunk. which would give me around 5 cuft net for my ported enclosure. I currently have been listening to alot rap/hip hop, altered music, dubstep music. Anything to make the current single twelve boom. (it doesnt do it very well) it is in a sealed enclosure. I added poly fill to it and sounded better, just not really the loud take your breath away type of bass I am after. Looking at 2 Zcon 12's D2 2 bc2000D's strapped for power 2 d3400 batts(one trunk one upfront) 270amp alt big 3 2 1/0 runs Trunk location, forward speaker and port firing. ALSO I am looking at my enclosure design and If i go with the 7" wide port i will have 16.39 insq'd of port area tuned to 32.8 hrtz. I have been thinking about changing my port with to 6.25 and keeping the same length to get closer to 30 hrtz on my box tuing but It shrinks my port area to 14.09 insq'd. From the articles I have read Most people when they post there setups the regulars will point out they could use more port for the set up. Looking to find out if most agree with trying to keep as much port area as possible? With the change in my enclosure would this still be suffiecient space? I have a question on my front baffle as well. If I double baffle and use the outer to recess my sub. should I still double layer the baffle I attach my sub too? and still use the outer for my recess look. If I missed some information sorry. I will just have to add later.

Was thinking about xcons in a sealed box any thoughts

That is great. I ask such simple questions compared to some on this site yet someone always is kind enough to answer them for me. Thanks man much appreciated.

I am looking at making bus bars. I have seen some from a guy everyone calls toolmaker. If I choose to make my own, Aluminum should be sufficient for this correct? I have not found any reason why I shouldn't. Most of what I read states just that the aluminum is less durable and doesn't rust say if I went with steel. thoughts? On the sub ohm question I just wanted to make sure I understand it correctly before I order. With what I have learned I was looking at ordering the 2 ohm models and running them in parallel/parallel to get .5 ohm. But I believe this may be incorrect with some more reading. My plan was to run the two subs off of both amps strapped together so that one power unit would control both subs in the common chamber enclosure. This way I didn't have to gain match each amp so they wouldn't cancel each other out with different power being applied during use. Hope I explained that correct.

So I am looking at running 2 bc2000 amps strapped on 2 12 subs. I read a post earlier today and cannot find it now about ohms with the subs and how it changes due to the guy had strapped amps. More Basic questions needing understanding before purchase. Which ohm should I choose for my subs 1 0r 2 ohm? What will the different outputs change to due to me strapping them?