hispls

...Maple Syrup? Got a farm up in Maine and I produced a couple hundred gallons. Got some small glass gift sizes I'm using as gifts to cool ppl. FS/FT Pure Maine maple syrup: gallon 50+ shipping half gallon 27+ shipping quarts 15+ shipping pints 8+ shipping 125ml glass bottles 4+ shipping (glass is expensive to package in!) LOL

Protip: Gain knob is NOT a volume control

Shocker Sig 15" vs. Fi BTL 18" Shocker Sig 15" vs. TC 4000 LMS 12" (vs size 13 timberland boot)

Lots of people like the type R's. IMO there's better stuff around here for the money, but for something you can get at a big box store they're a good value. I've owned some X-con 18's (sold them before I got to play with them). They are pretty formidable and looked/felt well built. I wouldn't hesitate to run 2000W to them...then again you need to pay attention to bottoming out and funny burning smells. A single good 18 in a well built box will do all you want. Sub up is fine in SUV or wagon. Less better drivers is generally better than more poor drivers IMO.

You didn't even mention your goals.... Still both companies make a quality product so I'm sure you'll be impressed.

I have mine in 4 cube temporarily and tuned to 40hz. It's pretty loud and sounds OK. Looking to rebuild as I think it can be more efficient and sound a bit better in a larger box. If you can't get the 5 ft net, go for a 15.

Those are great amps. IMHO you'll be hard pressed finding anything much better for the money you can sell them for (unless they're really mint condition)

How often? I get it about once every 8-10 turn-ons. Every 40-50 turn ons for me now, which is odd since with same HU it was happening more like 1 in 10 in my last car?

I suspect because you would notice little to no difference between 28 and 33hz and considering your space restrictions, it might make things more realistic.

Hopefully Staphen can help you troubleshoot and find the problem. Mine was a very early production too from the DIYMA group buy so I'd think if anything bugs would be ironed out later. I must say I had more noise in general in my last car but I doubt it was any of the gear since the same gear is really dead quiet in my new install and after a couple months of playing I've only had the turn-on to protect problem about 3 times. It's a shame since the idea of the extra "smart" protection is sound but in application it seems to be not too compatible with many cars/HUs.

The chrome colored opti line: 1000.1D 500.2 200.2 100.2 I think there's a few more and a 4 channel. The newer optis have a more flat topped heatsink and the Zed ones say "designed and manufactured in the USA" the new ones say "designed in the USA" All the older ones have great pre-amp features and a nice clean Zed board. I have some pics of my old 500.2's here: Online Car Audio Competition OCAC - Top Installs from around the World, Best Installers and Installation Shops

If you believe that'll happen real world I've got a bridge for sale.... That being said I noticed a difference running old school A/B amps at 4 ohms and running new class D at 1 ohm, but I suspect more of that is the impedence than the class of the amp. Personally I'll do class D because the technology has come a long way and although the efficiency difference isn't as extreme as some would have us believe, it's still substantial and worth the tradeoff. I was also thinking at the start that this didn't look like a Zed board....still an old school beast.

I get the protect at turn-on occasionally. I think trying a different HU may fix this as not everyone experiences this. My leviathan is dead quiet. My thought is if the problem is happening with EVERY amp there's something else going on somewhere.

Title sais it all. Pic of Leviathan needed for new banner.

The difference for your application would likely be splitting hairs. Either are very capable and it's not like your pushing the power limits of either with 2KW. It's like people who blow thousands on golf clubs thinking it'll help their game when a few months of lessons would likely actually make a difference. People who do change their woofers a lot don't ask, they just buy and test. If you buy right you should lose much on flippping it afterwards and not end up paying too much to audition either.

Out of those I'd go for 8 15's. Way more cone area and "wow" factor. I'll also echo the sentiment that 4 18's would be a lot less work!

Pikcking up a pair of 18" X-Cons this week. Any TS Parameters for these available?

sweet....that would be my final amp right there... If I had a dollar for every time I've said that.....

LMFAO 12.8 cuft box is like a coffin. I'd try a sono-tube box for home project. MUCH lighter, no flex if you have thick top and bottomm, and you can finish it to look like a large pillar in the corner of your room. the only up-side is that it doesn't take a crazy deep port to tune 12ft down low.

More info on the methodology of your tests.

I'm still running my old Boston Pro series 3 ways (from the 90's). There's a set or two on eBay at a decent price. I'm really happy with them and they sound really good off low power. Honestly if they died tomorrow I'd probably look to replace them with the same thing. They hold 250W a side easily if crossed over @60hz.....my only beef is the huge ass crossover...which would be great for display if that would work in your install but they're a bitch to try to hide. That being said, if you're careful with your install 2 way speaker systems are very capable, and RMS power handling is no where near the whole story. More important is what will sound good/loud enough for you with the space/power/budget you have to invest. Many lower power handling speakers will get very loud off of little input...it's called efficiency.

Smaller than the Deuce (replacing that AND gladius) Welcome to your new home.....here...meet your friends Powered up it looks sweet. Haven't looked in the dark yet but I suspect these LEDs are as bright as they say. In case anyone is wondering what the sundowns are for.... TC 4000 LMS 12's (Custom re-cone by PSi) These things beat out at 15-30hz....need to re-build the box next year. Trunk is a little dusty. The guy at the body shop got a bit of dust in there while he worked and I haven't had a day to pull apart and vaccuum.

I posted some pics there a month or so ago and don't seem to be able to do it again....is this section down or is it my browser or something else I'm doing wrong?

Confirming the first batch has shipped. I got mine just now and I'm on the east coast. OMFG it is sexy!!! I hope I can install this before the rain comes in.