vanquish

bump...

UPDATE: AUDIO ART *** SOLD ***

It is! One of my favorites. Small footprint with all the power you could need for a front stage (I ran it w/ a 2-way active setup)

SOLD!!!

1. Product: Tru Technology SSLD6i (6ch Line Driver & Conditioner) 2. Specs: http://www.trutechnology.com/products/Archive_Line_Amp/linedriver001.html ^^^^^ 2 in 1 line driver and conditioner! Bur-Brown and many other amazing components like the rest of the Tru Technology lines Cleaned up my signal path just as advertised. 3. Description/Condition: see above 10/10 condition 10/10 working 4. Price: : 130$ shipped 5. Pictures:

** NO TRADES ** 1. Product: Digital Designs Audio (2) DD-AW6.5" Midbass (2) DD-AT28 Tweeters 2. Specs: 120w RMS each (They'll handle plenty more just like the other Digital Designs Equipment if you're smart about it and have clean power) DD-AT28 (Frequency range 1,500-30,000hz) http://ddaudio.com/products/mobile-audio/mids-highs/audiophile-series/at28 DD-AW6.5 http://ddaudio.com/products/mobile-audio/mids-highs/audiophile-series/aw65 3. Description/Condition: Designed and Built in Germany! Perfect for a 2-way active setup... IMO they're very warm sounding and aren't fatiguing to the ears. I liked them better than my Focal Polyglass set personally. 9/10 cosmetic 10/10 mechanical 4. Price: : $425 5. Pictures: [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br] [br][/br]

Item(s) for Sale: (4) Diamond Audio (WCC Rebadge) Tweeters and crossovers Item(s) Description/Condition: Brand new never powered or used. (if you don't like the sticker you can take it off with a straight edge razor) 10/10 mechanical 10/10 cosmetic Price: 60+ shipping per set Item Pictures:

1. Product: Audiocontrol LC6i 2. Specs: Maximum Speaker Level Input: 400 watts Maximum Output Voltage: 9.5 volts RMS Frequency response: 10Hz-22kHz THD: 0.01% Input Impedance: 20 kΩ 3. Description/Condition: High to low converter for factory vehicle installs 10/10 condition 10/10 working 4. Price: : 120$ Shipped 5. Pictures:

No b.s. here please only looking to purchase a new or used Steve Meade Designs DD-1 Has to be in good condition PM ME THANKS

Umm That's not how this forum works

something about the E.L.D. re-adjusting as to why it ran horrible on first startup i'm going to drive it around and see what happens.

Hooked up the big 3 and first time start up the car was running really rough rocking like crazy, something is wrong. Started it again this time it ran fun but The speedometer stopped work!? wtf did i Do Charges @ 14.2 so the alt is working Neg -> Frame Neg -> engine block Pos -> Alt

I checked the exposed fuses with a dmm for continuity they read fine. I didn't however unplug the massive fuses under the hood.

no that should be located way in the back of the engine. Theres a green alternator plug that I unhooked but plugged that back in

It's not stuck on if that's what you're asking but yes all the dash lights work

yeah not happening. starting to regret attemping this big 3 ;(

2004 accordI unplugged the alt and unhooked the battery that's all. everything is back where it was with factory wiring and all

The factor ground from the negative battery terminal is still there in the second picture. Do you mean remove the new grounds and see what happens? Will this be ok to start the car without those two grounds

bnib 250 shipped. pm me

I have (2) 12" Intelligent Audio Systems (TC SOUNDS PROTOTYPES) 3" Copper Coils Single 3ohm 1000w RMS Designed for 1 cubic feet sealed enclosures. w/ poly fill added All I have is a basic 5 channel samsung home theater system that came as a package deal with my bluray player, so i'm obviously looking to upgrade. For starters I'm only looking for some power to push this substage. I looked into Crown XLS/XTI amplifiers around 2,000w RMS because that's all I know.... what brands and models should I consider, nothing top of the line but reasonably priced! Will I have to buy a receiver to hook the amplifier up to it. Not really sure how this works so any suggestions are appreciated. Pics of the subs:

ttt

Not much of a log but I took some pictures along the way. I will say this sounds great and the low end really surprised me a single 8" setup. After a little break in I'll hook up the Digital Designs DD-C2a bridged @2ohms. Shout out to John23a for the design help. Enclosure is .7 @33hz Onto the pics:

Thank you I wish I had a tablesaw to make more precise cuts but with the tools I have it didn't come out to bad. The router bit is a "3/4" roundover" if you ever want to try it yourself.