-
Content Count
2,620 -
Joined
-
Last visited
-
Days Won
2
Posts posted by SpeakerBoy
-
-
this thread is from 2003 guys....omg you arent kidding.....*face turns red* i feel like a dip...
0 -
Vehicle would help too.derr I left that part out Yeah that would help
you will prbably find me strange for this, but i will have the box in my room. a requirement i left out was it has to be able to fit through a door way. i am using the visonik drivers from this box: http://www.millionbuy.com/visvb212pkw.html
same amp too, if that matters
0 -
i dont understand what u mean by clip out at medium power?Nothing should "clip" until you reach a power level higher than what you set it up for.
IF you use an o-scope and setup your amp and it's set at let's say vol. 26. Once all tested frequencies are setup and do not clip... then as long as you do not change any settings and do not exceed vol 26 in this example, nothing will\should clip.
i have one vice, that is spl... i cant stand soft bass it has to really hit so of course i just put gain at 8v and vol on pc at max and at that point, it isnt the amp's fault, it is the amount of amperage i have going to it. (one 4 amp box and three 1 amp plugs) when my bro (big into audio) tells me i need upwards of 250 amps. i tested this with my friends dad's car batt. and well, it works but MY dad is so paranoid about acid and the floor, that he says it has to be a power supply or no go. so thats my problem. hope that isnt TOO confusing lemme know whatcha think
0 -
yes i have a budget, around $150
0 -
well to start off, i have two 12's bumpin off a 2 chan. 350w visonik amp @ 4ohms i know it isnt much, but in order to get the 800w mtx i am lookin at i need something that wont clip out at medium power... please help me out here i need something to bump with til i can get a car (only 2 years!!)
0 -
I've been researching and learning about bandpass design for the past few months and have gotten to where I feel pretty confident in my designs. I have access to many speakers and a lot of wood for testing but would like to get more designs in the streets to get feedback on. If any of you have been thinking about trying out a new box for your vehicle and would like to give bandpass a try please let me know what woofers, how much power (amp model specifically), and your desired goal. Also measurements for your cargo area with details such as does the depth given allow for a rear firing port etc.Hope to get a few of you to bite, I don't think I'll let you down .
do you have anything in a dual 12 ported 32Hz box? ty for lookin
0 -
thats it, ive made my decision. im going to get a 03 18" xxx and tsunami 1100 watt amp. i just have to wait till right after the 15 to order. i cant fricken wait to hear metallica, mudvayne, and the occasional tupac on this sub.al
f-ing a finally lol a person besides me that has even heard of mudvayne and let alone likes them!!!
0 -
This is my first post really, just lookin around for an upfiring, ported design for two 12" woofers, preferably tuned to 32Hz....please and thank you for any feedback on this.
0 -
anything below 50 lbs for an 18" woofer is probably bullspit no offense to anyone...how much does an RE SX 18" weigh ???web site says 27lbs ???
that cant be right ? can it
0
woofers that really HIT
in Home Audio
Posted · Edited by DeepSubBoy
hiya people i am looking for an 8" woofer that will go into the box of the woofer that came with the samsung HT-Q80 surround system. something that hits, that makes people say 'Damn!! it's only an 8"!!' lookin at a JL because i am not really aquainted with home audio, leaning towards car audio as a career in fact....but if you know bttr, higher excursion, lower ohm-ed 8" woofers that will really put out, gimme a heads up....thanks
here is the woofer w/ system. btw, at least 200w rms please and thank you!!
http://shopper.cnet.com/home-theater-syste...ml?tag=srch_1_1
7"W x 16"H x 13-3/8"D