Jump to content

dsgfierce1

Members
  • Content Count

    202
  • Joined

  • Last visited

Everything posted by dsgfierce1

  1. dsgfierce1

    my system

    as of now (b 4 I Wire N My 3rd Kinetik) Im Runnnin 2 hc2400's & 1 300/350 AMP XSVOLT SPL Competition Alternator um if your planing on using that for a daily i would not use that alt there ment for comps only if you use them in a daily and drive around and bump for long periods of time that alt will over heat and fail i would recomend looking into a exsessive amprage or ireggi alt ohio gen is good as well if you want to go with powermaster which is good as well dont get one of there comp alts look into one of there high output daily alts from powermasters site "The SPL alternators are specifically designed for trailer only extreme competition vehicles. Because of the radical design, output at idle is usually 0 and because of additional heat created; these units should not be operated at full output for more than a few minutes. In some cases, SPL units can be custom installed as a second alternator to the original unit for street applications. However, caution must be taken that only short-term loads are sent to the SPL alternator."
  2. dsgfierce1

    kinetik or powermaster?

    On the Sundown site he recommends using Powermaster that is true but i bet you can allready guess what i went with! POWERMASTER lol im getting 2 d3100 and a 1200 atm thats all i can afford but that should be ok right now to run my 2 saz 3000d's with a yellow top upfront and a 300amp alt i plan on having 4d3100 and the 1200 with the yellow top upfront when im 100% finished
  3. It's highly unlikely it has anything to do with his alt. I'm assuming it's just that his alt may produce a higher voltage than others without modding anything. yea it might not be just with his alt lol but i know when i talked to dominick on the phone and told him i was still undeisided on kinetik or PM he was like ohhh no dont use kinetik at all we have nothing but probs with them get one of the powermaster xs batts so i was like ok lol im wating for my 300amp alt in the mail now orderd it monday
  4. dsgfierce1

    how many batterys?

    well i worked out something with what extra $$ i have i can get a powermaster d1200 and a d3100 for the back for the time being with a yellowtop upfront that should be ok till i get the other 3 d3100 right ?
  5. pretty much like the topic says i just want some opinions how many batts should you run on 2 SAZ-3000d's with a 225amp alt ?
  6. dsgfierce1

    Ordering new BTL???

    woot got my 2 18"s and my tracking number
  7. dsgfierce1

    2 X 18" btl's vs. 2 X 12" W7's

    i would still go with the btl over a JL tho much better imo the w7 is a nice speaker but not up to par with a btl just my 2 cent
  8. dsgfierce1

    2 X 18" btl's vs. 2 X 12" W7's

    yea i would have to say i second that opinion btl for spl all day long
  9. dsgfierce1

    2 X 18" btl's vs. 2 X 12" W7's

    okay revised question take one 18" btl w/ 2000 watts going into it and take 2 X 12w7's and run 2000 total watts ( 1000 watts into each) which is going to hit harder I already know that the sq would be better from the jl's. yea i think he wants to know what one would put out more db's 1 btl or 2 w7s
  10. dsgfierce1

    TEXAS BASS PRODUCTION

    tool
  11. dsgfierce1

    How did you guys find SSA???

    FI's web site which i found there site from steve meade's site and i found meades site from watching his vids on youtube so it was kinda like from one to another to another lol
  12. you should be using powermasters with that alt anyway i talked to dominick on the phone and he said that he has nothing but problems with the kinetik batts and his alts he told me to use powermaster wile running his alts that could be your prob
  13. dsgfierce1

    Welcome to the IHoP

    i love it when people talk chit they dont event know anything about i get a kick out of it of love how he thinks the company name is fibtl not Fi which means he has never heard a btl or of 1 yet still wants to crack on it Quote from a kid on youtube The reason why I am getting it installed is because I am good to my JL AUDIO dealer and I would like him to do it because he will install 1 or 0 gauge cable from the alternator to the battery. And you know what, this company fibtl what a joke. How many patents does your 18" sub hold? Does it have good spl or good sq? The W7 is way better then a fibtl.
  14. dsgfierce1

    how many batterys?

    well i have been told a bunch of dif things either you can have a run for each cell stright from the front batt to each of the cells in the back or a run for each cell from the alt to each of the cells in the back or you can run one run from the front batt and link all the batts in the back together in parallel not sure what would be the best
  15. dsgfierce1

    how many batterys?

    k yea ill just strap them and wire the subs for 2ohms which means each amp sees 1 ohm right? and just run them with the gain about 10% till i get the batts
  16. dsgfierce1

    how many batterys?

    thats cool well my plan is to run 4 powermaster d3100 batts biggest one they make its rated for 3100 max amps 1 upfront and 3 in the back but like i said all i can possible afford atm is 1 d3100 it will prob take about another month or so to get the other 3 im going with powermaster cuz there a little cheeper rated for more current and dominick recomended them to use with his alts said he has nothing but problems with the kinetics but either or thats what i plan on doing so your saying with what i got now i should only run one of the amps till i get the other 3 batts
  17. dsgfierce1

    how many batterys?

    ok i need a little more help lol i just orderd my 2 18" BTL's loaded 2 3000D's a 300amp ireggi alt 4 kicker tweets and all the 0guage wiring ect to hook everything up but i spent all my cash and have nooo money for batts so the question is with the 300 amp alt should i just run 1 3000d with the subs intill i get the batts or should i strap the amps and run them at 4ohms so they are not pulling there full potential current im just trying to figure out a safe way to run the amps till i can get the extra batts i should beable to get just 1 d3100 in a few days but as of now i have no extra cash just droped bout 4500 on all the other stuff
  18. dsgfierce1

    Some new BTL info up for pricing and ordering...

    woot just placed my order for 2 btl 18s loaded
  19. dsgfierce1

    Ordering new BTL???

    BTL BTL BLT!!!!! ahhh wating sucks a big one .
  20. dsgfierce1

    cutout diameter

    i know this is a real noob question but what is the cutout diameter of a btl 18"?
  21. dsgfierce1

    cutout diameter

    thanks alot.
  22. if so then how where they? of course as sundown site states the only place you should get them from is DB-r electronics i was just wondering if any one has ever tryed them and what was the condition of the amp if it was a refurb im just trying to see if i should go refurb and save some $$ that can be spent else where in the setup or should i just stick with buying the brand new amps
  23. dsgfierce1

    1 or 2 btl 18s for 4000watts

    i think it was john that said quote "it's an spl sub if you seal it I AM A keeel you!" lol
  24. dsgfierce1

    can ssd's handle 2000 watts

    POWER MASTER FTW!!!!!!
  25. dsgfierce1

    Let me guess

    yeah i hear ya im still trying to sell my bike so i can get some $$$ for my dang setup and 2 new btls !
×