brandonu
-
Content Count
19 -
Joined
-
Last visited
Posts posted by brandonu
-
-
hey i currently have a single 10" ssd stock options running off a alpine pdx-1000. what would the difference be between this ssd and a bl off 1k. i like my ssd but was curious about swapping for a bl. i listen to rap/hip hop
0 -
so fi has upgraded the btl ssd and q to the single slug motors, do they plan to do the same with the bl? i have a ssd and wanna try the bl but would like the newer version if its coming....
0 -
well what are your bass goals? with 1400 watts you could do any of the 3 just because you have 1400 wrms doesnt mean you have to use it all. leave your self some headroom. i have a ssd and its very nice gets loud and sound pretty gd. i dont have experince with the q or bl but the q is a sq sub and the bl is a mini version of the btl. if you want it as loud as possible go with the bl 12 . you dont have to ad the options if money is an issue, you could grab a stock bl . my ssd is stock and i run a alpine pdx1000 and it gets down rite nasty in my truck. im interested in getting a stock bl myself.
0 -
i have it all installed and will post up pics soon.
its tuned around 35hz. i had it at 32 33 34hz the lows were killer at 33 . 35 seems to be an all around good tune. Im using a 3" aero and it has some shuffling port noise. if i can figure out a design to use a 4" aero i bet i can get it a lil louder , problem is a 4" aero in 1 cube needs to be really long and doesnt fit in my box.
0 -
i did not take many pics but here is what i have. ill take pics of the install in the truck soon.
0 -
recone . you can try to jb weld it or somthing but good luck
0 -
that is the cutest little sub, are you going to have a build log?
well everything is already installed in my ride but ill do a lil build log on the box and pics of it installed
0 -
This subwoofer is one badass lil puppy. its built like a tank , im still in shock that this is there bottom of the barrel driver. i cant wait to get my enclosure built going to be in a cube ported to 32 hz single aeroport off 800 watts. such a lil beast.
0 -
not much room left in there for amps or anything. not bad of an idea tho. i had a single 12" hdc3 off 2k in a ported center console , it was pretty impressive.
0 -
thats a very nice box for your first time. good job man
0 -
i have a 10" ssd on order and am going to get started on a box was just wondering if someone cd look over my design. its a truck box its 35" wide 14.5" tall and has a 5"/9" angle / wedge. im using a 3" psp aero port that will be 17" long. running about 750 wrms. does this sound good? thanks brandon
0 -
i know someone has pics of the new style 2010 ssd i wanna see em.
0 -
i will be using a single ten in my truck and i want it as loud as possible, i will be using 1500 watts which line will perform the best??
0 -
looking for good sq and rather loud bassMutually exclusive goals...
basically i just wanna make sure a q sealed will have decent output . its going in a 1.3 downfire 5 inches off floor in a reg cab center console box. just want more output than my m class 10 in a .5 sealed on 250 watts behind seat enclosure
0 -
what do you think of a 12 ssd or q sealed on 1k rms. looking for good sq and rather loud bass
0 -
Well, if I had 2 cubes of space, I'd probably try that first, but that's just me...the upper end on Fi's recommended range is 1.5cF.i was thinking going with the fi recommended 1.1 1.2
0 -
With that much power and enclosure size, I would recommend the Q.how many cubes would you put a q 12 in sealed?
0 -
i am going to be running a memphis amp 1100 @ 1 ohm . its going in a downfire center console in a reg cab silverado . im thinking a ported 10 or a sealed 12. i have around 2 cubes to work with . im looking for a good overall response. what do you think?
0
whats the difference between a bl and a ssd off 1k
in General Fi
Posted
really?? because at times i can get the sub pretty warm and stinky. this is when i beat the hell out of it. whats the deal with the pdx amps? i have it because i have a standard cab truck.