FiAudioSubwoofersjj
-
Content Count
158 -
Joined
-
Last visited
Posts posted by FiAudioSubwoofersjj
-
-
the burp only happens when i unplug my mp3 player(phone)
0 -
will the burping/popping noise damage the sub
0 -
does it damage the sub?
0 -
are the burping/poping noise bad for the sub?
0 -
what do you mean by how does it sound wireless
0 -
the sound of humming and also pops sounding like someone burping came back again after a while i dont know what is happening
0 -
so i just unhook the wires then connected them again and the system has not popped or hummed
0 -
i dont know whats going on im afraid to use it again cause i am afriad i might blow it
0 -
yeah so the at 1st the pop only happened when i plugged in the my iphone but after turning up the volume more another pop will happen followed up by a loud humming
0 -
yes
0 -
whenever i plug in or out my mp3 player into the stereo my Fi Car Audio SSD 12 makes a pop sound .. so when i was playing my music i gradually made the volume louder then all of a sudden the sub will pop and start this loud humming noise.. i dont think i blew it because i played it again and it sounded fine until the pop and humming sound came again
0 -
thanks... i live in a court and most of my neighbors are my relatives and close friends thanks for giving me tips
0 -
Bicycle... Cool I took my old 6.5 PA Speakers that I used to use at my DJ gigs...
Actually the sub sound pretty good while on a bike tried it with one 8 and still sound loud and clear I just need box dimensions for 2 8's dual ported box but like the picture I'm my other post
Thanks
0 -
Im going to build a system for my bike and i dont know what box dimensions i need i will be using 2 8's and 2 6x9's and a small 400 rms amp
the box i was thinking of was with the 2 8's each one on each side and the 6x9's on top of the box ... something like this but with 6x9's
0 -
All Of Fi Car Audio Subwoofers !!!!
0 -
Then what is a true t-line sub box
1 -
No this going to a wrx wagon
0 -
I am going to build an enclosure soon and I don't know what box I should use
Which box will get loud and clean a t line or ported , my sub is an Fi Audio SSD 12
any one have plans for either my trunk is 33x21x15
I like the quarter wave t line design but I'll do what you guys think is better
Thanks
-JJ
0 -
Are there any 3D designing software to design a custom subwoofers box? thanks
-JJ
0 -
thanks nadcicle,
so i followed the steps yesterday but left my other settings the same as before like lpf, subsonic, bass boost, etcetera ... the gain i turned all the way down then i switch the input sensitivity to 2v-8v
correctly set the gain and when i turned the volume knob about 20% on the headunit the
sub got really loud.
thanks guys,
-JJ
0 -
heres how my amp looks like... can you guys help me set my amp levels correctly? i dont know anything about the switches like input sensitivity and phase
Thanks,
-JJ
0 -
Any other suggestions i should try ? did i set my amp levels right ?
thanks,
-JJ
0 -
http://www.crutchfield.com/p_130X360BT/Pioneer-MVH-X360BT.html
just checked it this is the correct one
0 -
if i had a box tuned around 40 hz how do i make it play notes lower like 20-40hz ...recommended enclosure ?
0
wiered noises
in Fi Technical
Posted
no