Do any of the ZED amps match the quality of...

[Do any of the ZED amps match the quality of...]

Do any of the newer ZED amps match the quality of the old Rodek amps?

[ESX and ZED branded Zed amp pic's. Who has some clean ones?]

You guys didnt list one of the best brands ZED ever made. The Rodek line of amps, i have (3)2300i's and (2) 280i's and a Rx100 crossover. I dont know how to post pics sorry

[Old Skool USA-6000 class a/b info needed]

Old usamps were different type of monster. We underrated and recomended certain things just to be on the safe side. But any of the old school usamps were mod able

[Old Skool USA-6000 class a/b info needed]

Any amp can go "pop"

Especially if you run it way way below what it is stable. The manufacturer didn't rate the amplifier stable at a certain ohm load for nothing.

[Old Skool USA-6000 class a/b info needed]

One it wasnt the last one produced and they all were capable of running @ 15v and at 1.5 ohm. I actually have the last one built because I was the one who built it, lol

[Old Skool USA-6000 class a/b info needed]

Hello

I purchased this amplifer recently and im after any information you may have on it.

US Amps USA 6000.

1 x 6000w RMS Class A/B @ 2 ohms @ 12.6 volts.

This amp has been custom modified by Dirk to do about 7000w @ 15volts.

The SAT has been disabled to allow 1.5 ohm safe running or lower with a good power supply. It was running happily at 1 ohm in mbh69s car when he had a XA3000D die for ice direct show.

This is THE LAST USA-6000 to be produced

Specs from USAmps site

Two Channel Class AB Amplifier

Total Power Output: 6000 Watts RMS

3000 Watts x 2 into 1 Ohms

6000 Watts Bridged into 2 Ohms

THD at Rated Power: 0.1%

Signal/Noise Ratio: >105dBA

Frequency Response: 5Hz-50KHz

Damping Factor: >2500

Fuse Rating: 900 Amps

Dimensions:

114mm / 4.50in High

229mm / 9.0in Wide

629mm / 24.75in Long

Weight: 14.52kg / 32.00lb

Variable 24dB Low-Pass Active Crossover

Pictures are of my actual amp.

I was under the impression old skool us amps where very reliable and solid how ever i have been told to be carefull running this amp as they are known to go pop!

I paid alot of money for this amp while i was under the impression it was very solid to hear that they can go pop like this is worrying.

Has anyone here any information regarding reliability.

thanks

[us amps usa6000]

The double d had the problems and the 6000 is a beast but it draws 900 amps of current at 2 ohm mono or 1 ohm stereo